ACTIVE Mold Stain Remover Gel Cleaner Heavy Duty Stain Cleaner for Front Loader Washing Machine Seal, Bathroom Grout, Shower, Caulk - Front Load Washer Cleaning Solution - 7 Fl Oz

Our shower is large annd deep and mold grows on the left corners where the shower head is because air circulation is bad. We have had a mold problem for years due to several showers being taken in there every day, the mold could never dry out. I tried bleach, hydrogen peroxide, every type of toxic mold cleaner and it never went away. But it was nasty! So I tried this stuff.First of all, I followed directions to a t! I placed a fan in my shower to really really dry it out. I took the shower brush and scrubbed the dry mold. Then I cleaned it. I dried the whole shower with a towel and let the fan dry it out fully. Then I put on gloves, a mask (you’ll need it- it smells like chlorine!) and eye protectant (just in case, the gel doesn’t splash but there were times when I was squeezing out the bottle that it “farted” and I was glad I was wearing eye gear). The bottle comes with a nozzle that allows you to target specific areas. There is a cap on the nozzle you have to take off. You also have to open the bottle- it’s a foil cover you peel back. Then you point the nozzle at the mold and gently squeeze for the gel to come out. The only trick is not to “scrape” the gel with the tip while squeezing it out- otherwise it moves to the side of the grout and hollows out where you actually want it to go. It took some trial and error to master just having the tip hover above the grout line and not actually touch it, but when I got it, it was pretty easy!!! Then I went to town following all the horrid grout lines. And there were a lot. I’m talking subway tile. I did not have enough of the gel to do the whole thing, but holy cow! You can see where I didn’t put it!!!! I would tap the bottle upside down to make the gel move to the nozzle to make squeezing easier. I used the entire bottle.After I put the gel on, I let it sit for almost 5 hours. It was amazing. The mold was gone underneath the gel. I took a damp cloth and wiped it and the gel had the consistency of dried candle wax and just fell to the floor. I gathered it up and put it in a trash bag. Then I cleaned my shower and let it dry fully overnight. After the gel dries it still smells like chlorine, but after throwing it away there was no remaining smell. I am impressed!!! You can see the areas that I put the gel so clearly, it looks like new tile.Some tips:1. dry the shower fully!!!!! If the mold is wet, it won’t work.2. Don’t let it come in contact with clothes! I had a blob fall on my sweats and I rinsed it with water but it left a little bleached spot.3. Wear eye gear and disposable gloves. The bottle will fart.4. When I picked up the dried gel, I just held it in my hand and slipped off my glove inside out, trapping it in my glove and creating a little pocket for it to be easily put in a trash bag.5. Even the gel can stain! I dropped a dried gel in my rug and it left a tiny bleach mark.6. Be generous with the gel. The areas I didn’t put a lot or did thin lines had some mold spots that did not fully erase.7. Let the gel sit for longer than you think. I had black slimy mold and I left it there for almost 5 hours. It’s gone!!!!8. Trust me. Buy at least 2 bottles. You wont regret it.All in all I am so happy to find this product and am already buying more to finish the grout lines. 100% effective.

I was very impressed with this product. We have a piece of caulk between the shower and bathroom floor that has been stained and moldy looking since we moved into our home 6 years ago. I have tried everything to clean it off but nothing worked. The directions advise you to let this product sit on the area for 3-5 hours. It goes on very thick (make sure it is not coming out watery/runny because it will not be effective) and it does have a strong smell. I shut the bathroom door and turned the fan on, came back in about 30 minutes and the stain was completely gone. I let it sit a while longer while I cleaned other areas of the house. It came up easily and the caulk is bright white and looks very clean. It feels so much better that the stain is gone as it made me feel like my bathroom was dirty, even when I had cleaned the area countless times! We also used this product on our front loading washing machine and it was mostly effective. That mildew/build up was a bit thicker so I think another treatment would resolve it. Overall this product was very effective and I would recommend it!

This ACTIVE mold stain remover gel has been incredibly effective at tackling stubborn mold and mildew stains in my bathroom that other cleaners couldn't touch. The gel formula clings to vertical surfaces much better than spray cleaners, allowing it to work longer on problem areas without running off, and it genuinely removes black stains rather than just bleaching them temporarily. I was impressed by how well it worked on grout lines and caulk where mold tends to embed deeply, and it left surfaces looking genuinely clean rather than just superficially whitened. You definitely need good ventilation and gloves when using this product as it's quite strong, but the heavy-duty formula means it gets the job done in one application instead of repeated scrubbing. While it's more expensive than basic bathroom cleaners, the professional-grade results make it worth the investment when you're dealing with serious mold problems that need a real solution.

It worked very good on my front load washer.I would recommend. It’s the 1st thing I’ve used that’s removed the black stain on the rubber gasket. Worth the cost. No strong smell. Very easy to use.

I never write reviews but I can’t stop recommending this product! I had spent days trying to scrub mold out of my new house when I finally came across this mold remover. This is like magic! I’ve applied it in my shower, grout on my floor, pieces of my washing machine, around my sink, and it couldn’t be easier! It takes seconds to apply, come back a few hours later and good as new (simply rinse or wipe off, no scrubbing required)! My only complaint is that the nozzle of the bottle isn’t the best, sometimes comes out slowly and then a big clump all at once but that doesn’t take away from how much I love this product, this will definitely be a new constant in my house!

It WORKS!!We have a 1980s shower that hasn’t been remodeled with one inch tiles on the bottom, so lots of grout. I have used various products with no success. I applied Active Mold and Stain remover to the black areas of the white grout and left overnight and voila!! It’s all white!!I used it in our 6 yo bathroom grout and all the stinky smells are gone!! Yay!!Because it works so well I find the value good.One bottle 7 oz(?) lasted me 2 showers.No scent. So easy to use (but I didn’t quite follow directions with wiping off and letting it dry before using the shower- hope that doesn’t back fire on me).In short- stop searching,save time, here is your product!! highly recommend!