279834 Dryer Gas Valve Ignition Solenoid Coil Kit - For Dryers Premium Replacement Part by DR Quality Parts

The parts arrived quickly and functioned as expected. Very simple repair.I pulled up the service manual for my dryer. Per the instructions I measured the resistance (Ohms) across the contacts of both coils. The 3 pin coil had an open between pins 1 and 3. It should have been around 1500 Ohms and the measurement came back infinite. Definitely bad.Before installing I measure the continuity on the pin sets of both coils and they were within the specifications presented in the manual.I installed the coils, reassembled the dryer and everything worked as expected.There are other coil sets for less money but they had reviewers stating that they didn't work for certain applications.This brand had a low number of negative comments which was my reason for spending a few more dollars than the cheapest option.

Exact replacement coils for a Whirlpool LGR5636EQ3 dryer. Easy to install

They were great works fantastic glad for them Parts.

Fixed gas flow (no heat condition) on Admiral Dryer.

Shipped quickly, easy install took care of my heating problem

UPDATE: After all the info below, this part was not the fix, the new coils measured almost identical resistances to the in-service coils, therefore my dryer’s issue is still there. The only thing that still bugs me is that these coils don’t measure what the technical service document says they should measure. If I find the fix, I’ll post it here.I purchased this very item (kit) in February 2019. Well, back then they were the fix, but 35 months later the same issue of clothes taking longer to dry has returned. This "kit" # 279834 is the way to go, see my comments below. However, I will not buy this same product again, I want to try a different third-party manufacturer of the kit (279834), to see if it lasts longer than 3 years.If you have a Samsung Model DV328AGW/XXA, your Gas Valve Assembly should be 25M01A Type 128. This Gas Valve Assembly was made by White-Rodgers, who designates this by their own MFG P/N 25M01A-100 (Universal Replacement Clothes Dryer Combination Gas Control). Also, the label on the Gas Valve Assembly reads Maytag (Customer of White-Rodgers) Part No. 6-3061760. In short, this is a White-Rodgers manufactured assembly, made for Maytag (purchased in crazy bulk?), and Maytag appears to have re-sold these to Samsung for installation in their dryers.Noting the above, the 25M01A-100 utilizes Secondary Solenoid Coil Model Number F91-3889 (single coil, two pin) and Booster/Holding Coils Model Number F91-3890 (dual coil, three pin). According to this listing, for Ultra Durable # 279834, it is a third-party manufacturer of this kit/set of two solenoids. The # 279834 actually refers to the Whirlpool Dryer Gas Valve Coil Kit 279834, and it is equivalent to the two White-Rodgers solenoids. By the way, White-Rodgers is a division of Emerson Electrical Co. Also, remember that # 279834 is manufactured by Whirlpool, and the individual OEM solenoid coils are manufactured by Emerson and likely White-Rodgers, I'm sure there's more out there, just adding to the confusion.Anyway, searching online appliance stores, they cross-reference the Kit # 279834 (two solenoids) to be able to replace individual solenoids F91-3889 and F91-3890 (among other part numbers). So yes, this is good for use on many Samsungs, in particular, those whose Gas Valve Assemblies are White-Rodgers # 250M01A-100 (25M01A Type 128) or Maytag P/N 6-3061760.

Was a perfect replacement for my KitchenAid gas dryer.

For the error code E1 of our dryer, this turned out to be the fix. When the internet tells you it is one screw for the cover, though–trust me–it's two. They work great.