Question 1

Will this fit a 760\20 commemorative edition?

Accepted Answer

I'm not to sure but I don't see why it wouldn't fit. But you might want to call crosmans customer service for advice on that.

Question 2

Why is it necessary to order both the Valve and pump cup and also order the reseal kit?

Accepted Answer

That would be redundant. It is not necessary. The new valve and pump cup will fix the problem completely. The seal kit is for those who wish to take the old valve apart and replace the seals instead of buying a complete unit. The kit with the new valve and pump cup fixed mine and it works great.

Question 3

how do you install the rebuild kit

Accepted Answer

First make sure the Rifle is not loaded. Empty all BB's and pellets. 1.With a Flat head screw driver remove the stock. 2.On the left side and toward the front of the pump housing remove a small retaining clip on the pivot pin with a small flat head screw driver. (Note: be very careful not to loose while prying off) Next with a small nail or punch drive out the pivot pin. 3.with a 5/64 allen wrench loosen the set screw on the top of the pump housing and slide forward. 4.Remove the Pump handle and pump assembly by sliding forward. this has the rubber plunger on it. set assembly aside. (The rubber plunge can be removed with a pair of pliers using a twisting motion)5.Remove the cap on the cocking bolt on the right side (if equipped) 6.Remove the three screws on the right side of the receiver and lift off the right half very carefully.At this point take a picture of the assembly and note the locations for reassembly 7. Lift the barrel and pump housing from the receiver with a slight twisting motion to clear the trigger assembly.8. Remove the white plastic end cap with spring attached from the back of the pump housing9.  With a long stick or cleaning rod push the Air chamber out the front of the housing (Take note of the position of the air discharge orifice on the top of the air chamber for re installing the new air chamber)10. Lightly oil or use a gun grease on all part prior to re-assembly 11. re-assemble in the reverse orderBefore putting the right half of the receiver back together check the cocking bolt to make sure it functions (it may have to be slightly cocked to re-assemble)I hope this helps.You can also watch a video on line by googling  (how to dis-assemble crosman 760 air rifle)

Question 4

Will this work in a model 3300. Serial number 20197?

Accepted Answer

No. 
Look up your model # and year at the Crosman web site for more detailed info.

Batteries Included?	No
Manufacturer	Crosman
Package Dimensions	10.79 x 6.6 x 1.8 cm; 41 g
ASIN	B00D6VN6WO

Crosman760 Rebuild Kit - Includes New Valve & Pump Cup

Description

Specifications

Have a Question? See What Others Asked

Common Questions