10uF 63V 5x11mm Electrolytic Capacitor 10 UF MFD 63 Volt 0.2x0.43in Aluminum Capacitors (Pack of 15)

I measured a few of these capacitors that were rated for 1,000 uF. They ranged from about 800 uF to 980 uF. I used 4 different devices to make sure that my readings were correct and all 4 devices agreed that these capacitors are not very precise. With a tolerance of +/- 20%, that would mean that these can range from 800 uF to 1,200 uF. I've found that these have been under but still within the advertised tolerance.These were priced really well, although I have more than I needed. I got these to replace a capacitor that vented out on a battery charger and this was a good replacement for it and seems to be working fine.

I bought this product to fix a instrument cluster assembly and the capacity was great. I also was suprised with the quality and quantity for the price paid.

My air purifier suffered a power failure (apparently a common issue with this model). Went on YT and saw a video showing the stock capacitors have a tendency to go bad. Sure enough, after opening it up, I had all kinds of brown fluid on the board and other components near one of the capacitors.I really only needed to replace that one, but since I had so many from this kit and wanted a little extra soldering experience, I decided to swap them both out. Put it all back together and the lights disappeared and the unit acted normal again.Probably took me about an hour to desolder both capacitors off and solder new ones on (I learned flux is essential for removing solder - that's why my solder wick wasn't working well), but I saved myself a good $150 - $200 by changing these cheap components out. Also saved my unit from heading to a landfill, as it works like new again. Great value for the money!

I read negative reviews regarding the poor tolerance of capacitors from this vender posted on Amazon. So, when I received my order I tested the capacitance value and found all of them to be within tolerance.The only thing I cannot verify is the breakdown voltage because my Fluke meter cannot test at 450 Volts.

Worked great in replacing the old ones in my Bose system. LED screen works after replacing.

Good quality

Fixed the stand by instant on side of power supply of TV first try. For stars until we see how long it holds up. Original lasted 7 years of daily use. The can was slightly smaller in diameter than original. Didn't even check the capacity but probably should have and picked out the closest to tolerance and specified rating.

Good so far. Used them to fix a pair of Edifier speaker which has their capacitors go bad.