Wera Kraftform 2050 Micro Screwdriver - Phillips Tip 1 05118024001

Needed to access HDD of laptop and could not unscrew panel underneath as it was too tight with a micro screwdriver. With this one I was able to grip it better and was able to unscrew it easily without stripping the screwhead. Not sure why the top rotates - I would prefer if the handle was solid.Much better quality than ones provided in kits with loads of screwdrivers I don't need.

Annoyingly I found that while taking apart a PSP, my precision drivers weren't long enough to reach the deeper screws in the casing. This driver solved that. Not much else to say other than that really. Seems well made and should last forever with care. I guess the advice is to always try and mate the correct screws for the job to avoid chewing up the driver/screw heads. A good buy.

Ordered this to enable fitment of Ring transformer.Worked perfectly without damaging inferior quality material (Philips )screw heads.

As a heating engineer I didn't need a full set of these, as most sizes would never get used. So it's great you can purchase these individually. I bought 3 different sizes in total, 2 slotted, and 1 Philips. The rotating top is great for one handed speedy use, although the handle could do with being slightly wider or made from grippier material, as it takes a lot of grip force to tighten that last tweak for a secure job. Otherwise a nice handy screwdriver.

I wanted a Very High Quality screwdriver & that's what I got 👍👏I purchased 3 of these German screwdrivers, I had a Nikon D3X Camera & two lenses to repair, they fitted the tiny screws without any damage to the screw itself or the screwdriver, as as a retired Aerospace Defence Electronics Hardware Engineer I wanted the best in quality which is so important to get the right quality fit tool for these tiny screws on my Camera, without the right tool you can damage things beyond repair very quickly, now that it's repaired & all back together I cannot tell if it's ever been opened,Pay that little bit more & get the best tool to last a lifetime 👍Fits well in the hand, what I would recommend is a little pressure on the rotating end if you feel the screw is tight, it's good practice, with the rotating end it's very useful 👌

I have a DJI Mini 4K drone.Having watched YouTube about the drones, one of the main recommendations was to purchase a replacement screwdriver, as the one supplied is a bit to fiddly to use.This is absolutely perfect, it is aPH000, which fits the screws with a tight fit.I have used Wera screw drivers for years, they last & last, unlike others, where the crosshead wears down.I have stuck a piece of cork on the end to protect the Drone carry case.

Changing your propellers? This is the screwdriver you need! Don’t bother with the omen included with the drone, it WILL strip the screw heads and force you to cut the props off!This one is the one you need - you still need a bit of adequate downward pressure to remove the screws, but you’re able to remove (and reuse if you want - although I’d recommend using the new screws included with the new props) the old screws with relative ease!Well worth a small investment!! You really won’t regret it!!

Very good I recommend.