VEVOR Steel Electrical Enclosure Box, 24'' x 16'' x 12'', IP65 Weatherproof Carbon Steel Hinged Junction Box with Mounting Plate

I have bought plastic boxes for housing all kinds of things like relays , power supplies, charging stations, etc. The plastic boxes always fail the same way, they get brittle with UV light, and warp until they no longer seal out water. I have replaced water timers and other products because the plastic box they are held in all fall apart. So Again, I’m replacing a water sprinkler timer in a plastic box. This time though, I spent more on the box then on the timer to prevent future failures. I purchased the 16x16x6 all metal Vevor box ip66 box with a lock for my rental house. The housing is well made all powder coated steel with hinges and a grounded front cover with a bottom plate that is removable and can be drilled for power cords and wires that is sealed with a gasket. The front door is also sealed. Inside is mounted an exterior rated sprinkler timer by Orbit but since I’ve had so many supposedly exterior rated devises and boxes fail I decided no more. I mounted this sprinkler timer onto the removable back inside the box and ran a120 volt exterior duplex box with a gfci outlet to inside the metal box to power the timer and the wires for the valves come up through the bottom cover where I drilled two 3/4 holes in the cover and installed plastic hole bushings to prevent chafing of the wires and mounted the entire assembly to the eastern facing side of the house. I live in the SF bay area and all weather comes from the west and moves easterly. The box is on the leeward side of the house and is protected from weather by a 24 inch roof overhang in a sheltered patio. The lockable door is to prevent renters from getting into the box and changing the watering timer settings or unplugging it from the outlet. I’m a happy landlord now with it all buttoned up neatly inside this all metal box that should not leak or warp and is pretty secure. The door lock is a little chinsy and can be opened by a screwdriver if needs be but is enough to keep it fairly secure. If you need a real lock to secure the box and its contents you’ll have to find a lock with a key and replace the cheap lock. Overall, I am very satisfied with this box and it’s overall appearance as well as its build quality. It should now outlast me. Drilling the inside of the box to run romex and drilling the back and plate on the bottom as well as securing the timer and exterior rated duplex box revealed perhaps a 16 of an inch thick steel plate so, its definitely sturdy. The powder coating is even throughout and looks great.

I recently integrated the VEVOR electrical box into an advanced tech setup, and it surpassed my expectations. I'm using the box to support a range of devices: a Ubiquiti Nanobeam for backhauling data to a remote location, a Ubiquiti UniFi switch connected to a UniFi G5 Camera, a UniFi Access Hub for a gate operator, and a Generac PWRCell. Given the number and variety of devices, I was initially concerned about fitting everything securely. However, the VEVOR box proved to be both spacious and adaptable.Its robust design and IP66 protection level are perfect for my outdoor installation in Phoenix, AZ. I have peace of mind knowing that my high-tech equipment is shielded from weather conditions, dust, and other potential hazards. I added ventilation fans, essential for the Arizona heat, ensure that the devices remain cool and perform optimally. The keyed lock feature is a fantastic addition, providing a tamperproof solution and ensuring my setup remains secure.Furthermore, the box's design, combined with wall mounting pendants, made the installation process seamless, especially with the right tools. The integration of additional features like the RV Shore Power Inlet and RJ45 Panel Mount Waterproof Connectors was straightforward.The VEVOR electrical box is a top-tier choice for those looking to house multiple control devices securely. Its versatility, durability, and spacious interior make it an excellent option for various projects. I wholeheartedly recommend it.

I have electrical and plumbing for an outside project that I can’t just leave sitting out to get moisture on. This box was perfect. Very heavy duty. Was great how I could remove the inside back panel to work on/build everything, and then re-install the panel. Made job much easier

The reason why I purchased this was because I have an outdoor TV in an Apollo enclosure that I have on my deck on a TV Stand. My goal was to house a WiFi repeater and a Tivo Mini in the box to keep it safe from the weather but yet still be able to use it without having to open the box. What I learned was that it definitely passed the waterproof test, but when trying to use the Tivo Remote I would have to keep opening the box. This lead to a decision which was do I now have to mount this so that I can open and close the door to watch TV? Given the size and overall weight, it wasn't an option for me.Full disclosure is that the unit is VERY SOLID and worth the money for its intended use, but alas, trying to repurpose this so I can watch some Met games on my deck didn't work out and I returned the unit

Ordered 3 units, 1 wk delivery, HD Construction, great Door, weather Seal, lock and 2 keys. Perfect Powder Paint job. missing a few self-threading screws for cover but not a big deal. These are awesome units, a bit pricey but worth it. I bought these to store 3 HD 12 Ga 100 ft Extension Cords next to my new 2400 KV Generac in case of extended power outage to help my neighbors preserve food stuffs and provide some power for 911 lighting. I installed 2 independently controlled GFI Duplex outlets nearby with 20 AMP Breakers in Power Panel. These accessible Boxes serve to protect those cords from the weather long term. Makes us feel good to provide these in a 911 setting for neighbors and children. These Boxes are the icing on the cake. Rocky in Missouri