SPEC-D TUNINGBlack Housing Clear Lens LED Halo Projector Headlights + LED Bumper Lights Compatible with 1999-2002 Chevy Silverado 1500 2500 3500, Left + Right Pair Headlamps Assembly

I bought these after returning a truly poor quality set I bought from somebody on eBay. These are better built than my last set, but still not OEM spec.The biggest thing you need to know before purchase is that you WILL need to hardwire the LED lights. No idea why the company doesn't inform you beforehand. They also don't include instructions. I wasn't exactly surprised, because the last pair was exactly the same. But if you like surprises, this one's for you!The wiring itself isn't too big of a problem. A novice can accomplish the task. But do it properly! There are videos on Youtube showing you how. My suggestion is to go out and buy some wire splitters with female blade connector slots, and some male blade connectors. This is not a job for wire cutters and electrical tape. Do it right because you don't want problems with your driving lights.By far the biggest complaint I have with these lights is that the adjuster mechanisms are crap. I did not get enough adjustment room to properly adjust mine, so one of my headlights points higher than the other. It is acceptable, but I'm a bit of a perfectionist and it frustrates me that the manufacturer couldn't be bothered to maintain spec with an OEM replacement upgrade.The other thing you will need to know before purchase is that the included headlights are super low-quality halogens. They weren't much brighter than stock, but perhaps more yellow to orange in hue. And one of them burnt out after one week of use.If you are upgrading for the same reason I did, you will want to figure in another $120-$150 to get some actual quality high-intensity H1 bulbs to install in these housings. My headlights work just fine now and look great with super bright blue light H1 bulbs!

Directions could have been better for wiring in the halos. Looked online though and found that they need to be hardwired into the daytime running lights. Soldered them in and am very happy so far. Also the driver side headlight was a little hard to get in proper the mount was tweaked just a little, I assume from packaging. After some fidgeting it installed great. Really love the way these make my truck look. The smoked lenses are dark which is another great feature. My previous smoked lights were no where near as dark as these. Overall they look great and were not to bad to install. I would definitely recommend 👌.

They take your standard bulbs and downgrade to a H1 bulb which are the weakest, lowest, bottom grade of lights they make. There is no room with the way they manufactured the housing to fit any other type of bulb. You can’t even fit H1 LED bulbs. First set I bought the driver side High beam does not work. Returned it and got a new set. Figured I’m keeping them as the High beam worked. Can not see nothing at all on the dark streets. I drilled out where the bulbs go a little bit so I could at least put in super bright LED’s… still nothing see pics. That is looking from inside cab of 2006 Tahoe with lights on and you see nothing in front of vehicle. You see the halo well enough, but only standing in front of vehicle. Also would not 100% fit as all the mounting in the back interfere with metal vertical bracing behind lights.

If you wire these light right. The will run just fine. Mine went off a couple times and it was a wiring issue in my end so they do work. The look good. The housing is nice looking and the halos look great.Now the bumper lights I didn’t even see a way to wire in LEDs. I don’t believe they even have LEDs so that’s disappointingThe bulbs they come with are not bright at all they also do not take your normal 9006/5 bulbs. You have to buy h1 bulbs I bought some 60 dollar bulbs to replace them. They work fine however angleing these lights is almost impossible. If you have a lifted truck and you have to have these lights but a light bar in the grille or bumper so you can seeThe headlights work and do what they say and pictures(Minus the fake led bumper light) I personally would probably not buy again Just go and do the little extra and get some nice retro fit headlights or some good housings and nice bulbs

My picture doesn't show just how bad these are.Thought these would be really sweet but i had to cut off the extrusions on the back where the LED wires run because they hit against the truck brackets so they could not be locked in place.Even after that the adjuster wheels are so small and sharp I had to remove the lights just to adjust them and when they were finally lined up they still leave giant gaps and the driverside doesn't line up at all.The DRLs do not work or come on with any setting (white leds in the turn signal) and the halos and LEDs just come not wired up. I guess I get the last part but it's seems pretty lazy, but they fit so bad I haven't even wired them up.Visibility is horrible. My faded 22yr old stock housings still shined brighter and wider than these.Do not buy these just because they are cheap like I did, I'm gonna just buy a 300-400 dollar set from a different company and if they don't fit I'll send them back.Screw trying to modify a whole housing to fit that should already fit.