MagnaFlow 14832 Exhaust Muffler

Magnaflow is the way to go! My exhaust was falling apart and I needed a new muffler as well, so I decided to replace my old setup with this Magnaflow muffler. You really do get what you pay for, though this is rather expensive compared to other brands.First off, build quality is exceptional. The factory welds are very well done and are leak free. The polished finish of the body is super nice to look at, and the chrome tip is a really nice touch. From the photos you can clearly tell that this is the “lipstick on the pig” so to speak.However, don’t think that you’re going to purchase this and not be required to do some fabricating. This muffler is a UNIVERSAL muffler, for vehicles with 2.25” exhaust pipe. It is not manufactured with any specific vehicle in mind, nor is it designed to fit any specific model. I know that for some reason people will still ask in the question section for this item, “will this fit my 2008 Prius, 2011 Forester, 2000 Miata, Grand Caravan, etc,?” Do yourself a favor and figure out what size pipe your exhaust system is running, if it’s a 2.25” pipe, this muffler will work. The inlet pipe is 2.25” inner diameter which means it is made for a 2.25” exhaust pipe to slide into. You will be required to either weld the muffler to the exhaust pipe, or you can cut a slot into the inlet pipe and use a clamp over it to connect to your 2.25” exhaust pipe. As far as mounting goes—you will need to weld an exhaust hanger onto the muffler body in order for this to work. I repeat, you will need to weld a hanger onto the muffler body in order for this to work. This thing weighs enough to the point that you don’t want this hanging off your exhaust pipe without any support, you will seriously damage your exhaust system and possibly your exhaust manifold if you don’t not affix this to your vehicle somehow. Any exhaust shop will be able to do this if your are unable to weld.As far as sound, I believe this mufflers size is geared more towards a 4 cylinder engine, though as stated earlier it will work with any engine as long as the exhaust pipe is 2.25”. In my case, I’m running this muffler on a 3.8 V6 engine. For me, it doesn’t sound much louder if at all than stock which is fine. In the case of a 4 cylinder engine, this will sound a bit more sporty, “tuner” comes to mind.Overall, this is a great muffler that is well built and does exactly what is expected of it. Know what you’re getting yourself into before purchasing this and do not expect it to be plug and play. You will need to have an exhaust shop install this or you will need to do the install and fabrication yourself. This is a universal muffler, made for a 2.25” exhaust system. Save yourself the trouble of asking strangers if this will work in your car, all you need to do is measure the diameter of your exhaust pipe. If your exhaust pipe is 2.25” this will fit. Vehicle model is completely irrelevant! I would totally recommend this to anyone in the market for a new muffler!

Le muffler est super le sound est parfait je vous conseille d’enlever le résonateur si vous voulez entendre vraiment le sound je vais faire une vidéo plus tard le sound n’est pas trop fort alors c’est agréable quand on conduit

Muy recomendable, buen precio, no tuve problemas al recibirlo, llego envuelto en regalo como lo pedí, me encanto! lo recomiendo ampliamente.

09 Cobalt ss took a couple extra attachments, sounds good low and deep. should get better as time passes. 172 dollars for labor at Canadian tire. for this car dont take it too a dealership/ they want 275+ dollars for work.

I bought this to replace a cheap catback muffler on my RSX. It's much quieter and doesn't drone, but is still noticeable. I plan to add a larger resonator to quiet it down more.