Cooler Master MasterAccessory Vertical GPU Card Holder Kit V2, Premium Riser Cable PCI-E 3.0 x16-165mm, Adjustable Length for E-ATX|ATX Cases (MCA-U000R-KFVK01)

It's hard to find a nice vertical Gpu mount specially for the Lian Li 011D Mini. I tried to get theirs but you can't find it anywhere. I ordered different GPU mounts and this is the first one that came. Easy instructions. Easy to set up.Pros:* Fist my lian li mini perfectly* handles heavy gpus like a champ (I mounted it on with the Red Devil 6900XT.* easy to adjust.Cons:* you will lose all your pcie slots.* you need slim cables because they will need to go inside your case. Ones with big heads will have a hard time getting them through the slots.* even though it supports my huge gpu, slight sag still occurs, the further you stretch the gpu the more sag you get, but nothing mayor. It will cause an issue of you have a fan too close. Mines was just that that point but isn't interfering with it.It's a great GPU Vertical mount no dought.Great built quality.Just be prepared to lose pci express slots.

I recently tested a vertical GPU mount, and overall, it’s been a strong performer with some important things to consider.Pros:* Perfect Fit: This mount is ideal if your case has at least 7 back slots. It fits perfectly, making installation straightforward and hassle-free for most PC cases.* Strong GPU Support: I tested it with several heavy GPUs, and it held up well across the board. The mount is sturdy and easily adjustable to fit different GPUs. However, the main limitation comes from the riser cable rather than the mount itself.* Easy to Set Up: The setup process is very simple, with clear instructions that make installation quick and easy.* Improved Aesthetics: Installing your GPU vertically can give your PC a sleek, modern look, which is a nice bonus.Cons:* Loss of PCIe Slots: One downside is that you’ll lose access to all your PCIe slots when using this mount, which might be a dealbreaker if you rely on those slots for other components.* Riser Cable Limitations: The included riser cable isn’t ideal for high-power GPUs like the RTX xx80/xx90 or RX X800XT/X900XT. These GPUs can produce a lot of heat, which might cause the riser cable to overheat. Plus, the riser cable only supports PCIe 3.0. If you need PCIe 4.0, you might experience performance issues or even fail to get a video signal so remember to configure your motherboard to PCIe 3.0.* GPU Sag: While the mount supports large GPUs, it could be still a slight sag, especially if the GPU is stretched far from the mount. It’s not a huge issue, but if your GPU is close to a fan, it could become problematic.

Great but super heavy and need alot of room. Get the one with a gen 4.0 riser cable instead of the 3.0 because it doesn't work on alot of gpu/ motherboards. Gen 4 has a removable section to use on matx motherboard/cases. Everything is there to install it.

Don’t want to mount your GPU 1 inch from side of case? Try this. (I bought this used for $30)For thermals, I under-volted my GPU, andSturdy, easy to install, and and looks great. Cable is stiff AF, so 4 stars because of that. That may be part of the design so if you don’t care (like me) this worked perfectly.You can loosen two set screws and slide the mount towards the front of the case so that you can get your HDMI and DP cables in the case. However the riser cable is so stiff that it just doesn’t allow you to go very far unless you want to put a lot of torque on the PCI connectors. I didn’t want to do that so I clipped the metal on the back of the case to get my cables to the GPU.You could try taking a heat gun to the cable if you’re desperate and attempt to get the flex you want, but I’m not recommending it.

This product is more than fairly priced for its build quality and ease of install. Its perfect for showing off my founders edition 2080ti while also eliminating any stress from the PCIe slot. This riser should be a one size fits all for most applications. Its not heavy and pretty sturdy. It fits perfectly into my case aswell. Got it installed in under 10 minutes!

DO NOT USE THE RISER CABLE THAT COMES WITH THE BRACKET, GET ANY OTHER RISER CABLETHIS RISER CABLE HAS THE SAME PROBLEMS AS THE NZXT H100 CASE RISER CABLE AND IT SET MY $5000 PC ON FIRE AND NEARLY BURNED MY APARTMENT DOWNThe bracket was very well made and supported my 3090 very well and looked great, right up until it went up in flamesI plan on contacting cooler master and seeing if they will do anything to rectify thisDo not use the riser cable, please

It does look nice, but only lasted 3 years. I've been using a kit for 3 years and it looked great and did a great job, until a problem arose. My PC started randomly shutting down and freezing. Sometimes it would go days without an issue and sometimes it might freeze 3 times in a ten minute span. Usually if I was watching a video, or gaming I would have no issue, but if surfing or doing something on the desktop it would freeze. If I left my PC for a while and came back it might have restarted or be frozen. and I tried figuring out why. I removed updates, programs, checked my RAM and HDs. I checked every USB item and nothing. The program persisted and nowhere did I see anything about these kits being the problem. Finally, I took it into Microcenter and the guy checked the kit right off and found there was a problem. He removed the kit and mounted the card horizontally on the motherboard and no more issues. He told me in the last 3 years he has seen this about a dozen times. Something in the cable from the kit to the motherboard goes bad and it causes system shutdowns or freezes where the system requiring a restart. Will I put another type of kit in my PC? I just might.