معلومات عنا
دعم العملاء
احصل على التطبيق
قم بتوجيه الكاميرا لتنزيل التطبيق
حقوق الطبع والنشر © 2024 Desertcart Holdings Limited
🔧 Unleash Your Inner Tech Guru with LEAGY!
The LEAGY 4 In 1 Network Cable Tester is a versatile tool designed for testing RJ-45, RJ-11, USB, and BNC cables. With a testing range of up to 300 feet, it features an ergonomic design, audible alerts, and a low battery indicator, making it an essential device for professionals who demand efficiency and reliability in their networking tasks.
| Manufacturer | LEAGY |
| Part Number | part1950 |
| Package Dimensions | 21 x 11 x 4 cm; 10 g |
| Item model number | part1950 |
| Colour | Grey |
| Style | Modern |
| Power Source | Battery Powered |
| Item Package Quantity | 1 |
| Certification | eia/tia |
| Batteries included? | No |
| Batteries Required? | No |
| Item Weight | 10 g |
M**E
Easy to use
Good tester as it shows crossover etc, quick and easy to use.
M**.
Does what it's supposed to do.
No problem testing USB and RJ45 cables. All good.
M**E
Arrived faulty
Faulty
A**E
Identifed the faults on my cat 6 sockets
Easy to use just pop in a pp3 battery and put the remote sensor on one end and the unit on the other and press go to see which connection is faulty. Identified a fault on two wires...I must have nicked the orange and blue and white wires when stripping the outer pvc sheath on my cat 6 cabling. Re did the connections taking care not to strip the outer sheath too deep and all fine.
P**N
LEAGY 4 In 1 Network Cable Tester does what it says
Arrived on time and well packaged. Seems solid and well made. I put in a battery, it was a very tight fit but it did go in with a bit of a fiddle and I did a test on a cable that I knew was OK. It checked out the cable and all the LEDs lit up as expected, if a little on the bright side.Now I have not checked it out on a cable that I know to be faulty, that is something to think about, must give it a try.
M**L
OK as a spare.
Decent value but few issues. If the connection is fine then all is well but if there's a cross pair or missing ect it tells you there is a cross or an open but not which pin it is on. OK for a back up but no good for repairs or fault finding.
P**D
Indispensable
wiring connectors for my PoE cameras looked simple but would have been a disaster until I invested in this product and could quickly check continuity across all 8 wires
S**E
Really not much use
If you do have a fault on a cable, this tester will only tell you there's a short or something is crossed not which cores. It also give some very strange reading depending which end of the cable you test from. Really not much use.
ترست بايلوت
منذ شهر
منذ أسبوع
