10-Pack Cat6 Tool-Less RJ45 Keystone Jack, No Punch-Down Tool Required Module Coupler (Not Compatible with Patch Panel), White

Worked great for me. I did not install this into any type of faceplate so I can’t say anything on that. I can say I found the wiring to be extremely easy as compared to the standard RJ45 where all conductors have to be perfect and fitted into the RJ45 at the same time. Doing it one by one makes it so simple. Just follow the picture on the plug as the wiring is not standard from 1-8. The plug is set up kind of weird. Wiring 1/2 then 5/4, then 8/7, and 3/6. These are the 4 pairs but I have no idea why the manufacturer put them in this order. No biggie, just follow the pretty picture on the plug and the final outcome will be correct putting the conductors from 1-8 (internally). I was concerned that not using a punch down tool would not properly secure the conductors but I was surprised that they did not come out even when I was giving the cable a firm tug. Overall, very happy. I would buy again.

AMAZING! Electrician messed up my cable terminations and instead of forking over hundreds of dollar to fix it, I bought these instead. These were remarkably easy to install and work perfectly. Just do one wire at a time and it takes no more than 4 minutes per end. Tremendous value. As far as I can tell, the connection quality is perfect.

I bought a house that had phone jacks, but to my surprise were wired with ethernet cable. The phone system was some type of voice over internet, which I disconnected. I wired the cable at this end with regular ethernet connectors so they could be plugged into my switch. I had rewired a few jacks with regular connectors that plugged into a keystone coupler. I could then plug in devices like a normal wall jack. The problem was that this setup was somewhat cramped in the boxes in the wall. I found these when researching RJ45 keystone jacks.I was skeptical, but decided to give them a try. I wired up my first RJ45 keystone jack, but did it wrong because I didn't pay attention to the diagram on the device for the T568B layout. I just arranged the wires in their normal layout, but that doesn't correspond to how these jacks are wired. I know it was not advisable to do this, but I pulled up the wires and rearranged them according to the diagram on the device. This did not cause any issues and things worked just fine. I guess it pays to follow directions...One direction I did follow was to put in one wire at a time and press down on the crimper for each wire. This way you are not trying to make sure all wires are loose when you go to crimp them.As other reviewers mentioned, there is no cable relief to hold onto the cable sheath. I would be concerned if there was going to be any movement of the wire, but these will be in keystone jacks that will not move.Even though the clasp that closes and pushes the wires down feels secure, I decided to secure it closed with electrical tape just in case. I didn't go as far as to wrap the exposed loose wires as a form of cable relief since this cable is in the wall.If you want a quick and simple way to wire up your keystone jacks, these RJ45 jacks. However, I believe these cannot be used in patch panels. If you need something to work in a patch panel, I saw other brands that said they would work in that setup. This brand said it would not.

I'm a first time user of this type of product. It came with no instructions at all which is why I gave it a four star. I had to watch it's product video several times to figure out how to use it. Once I figured it out it was very easy to use. Would definitely recommend this no punch down tool connector. I punched down two wires at a time.

These keystone jacks felt well built and easy to install.

I used these to relocate my ISP modem, and they worked perfectly.The temptation is to try to put all the pairs in the jack and close the cover to punch them down all at once. Don't do that.Make sure the pairs are all cut to the same length. The wires can be inserted into holes at the top of the jack. Just insert the end of the wire into the hole at the top and bend it back into its slot. Insert the first wire and close the cover on it. Open the cover and insert the second wire, then close the cover on that one. Repeat that until you have all the wires punched down. Depending on the plenum-rated cable you are using, it might be impossible to close the cover to punch down all four pairs at once, but one at a time is no issue. I just used the wall plates I had on hand, which were from two different manufacturers, and these jacks snapped into them with no trouble.These are a little more expensive than the standard jacks that you can buy in bulk, so I might not use them for a big job, but they're perfect for adding one or two drops in a hurry. I'll keep a few in my tool bag.

As a rookie at installing these had a learning curve. Would have been nice if it had some simply wiring instructions included. These are not straight wiring on the female to male ends. If you follow the wiring on the this female plug MAKE SURE that you follow the standard wiring on the male end. This means you are not matching color to color. These have a circuit board that changes the wiring internally.But, easy to use and install

I tried wiring 4 in various ways since the colors on the jack are non-standard. I tried how it says to wire it. Nope. Tried normal B wiring like everything else. Nope. Tried the reverse. Nope. Who knows what was wrong. It's very difficult to get the wires in place to clamp down, the connections are bad, and it pops back open. I'm going to return it and just use a F-F keystone. Save yourself a headache.