Creality3D Printer Filament 1.75mm, Rainbow PLA Plus Filament, Multicolor Strong Toughness No-Tangling Dimensional Accuracy +/- 0.03mm, 1KG Spool(2.2lbs)

Was delivered quickly and works well. Was able to 3D print many items from just one roll. Smooth printing and nice colors.

Great product, made a 3D snake and it came out great

This is my go-to filament when I want a hassle free multicolor gradient product. It is affordable and runs through my Bambu Lab printers without clogging or stringing. It also plays nice with the AMS since it comes on the plastic spool. Provides a nice finish and the color quality really is excellent. Highly recommend this product.

The device is really good at keeping moisture out of the filament and made my prints better quality. It’s a huge step up form using the silicone bags. Definitely worth the money.

Since this listing is for a number of different filament colors, and also randomly a filament dryer, note that my review is based specifically on the rainbow filament.I haven’t had any issues with clogging, adhesion on a smooth PEI print sheet (for Prusa CORE One) is good, layer adhesion is also good, and I haven’t experienced any other problems.One thing to note is that there is a lot of filament length in between color transitions. If you’re printing something relatively small, it’s likely to be all one color, with maybe a little bit of a second color added in depending on where you are in the stool. Where this filament really shines is on large prints, where you actually do get a second or maybe third color.In my opinion, they should have a version like this (and label it accordingly: because this isn’t what I was expecting), and a version for smaller objects where the colors transition more closely together and the rainbow repeats throughout the spool. I’ve only used about 1/10 of it so far (it’s on yellow now), so I’m not sure how many rainbows you get in a spool, or if it just starts on violet and ends on red.In the picture, you’ll see the “Robo Alpaka” print from Prusa’s test models. I thought it looked pretty decent and the print quality wasn’t bad.

This prints well and is durable and strong especially when printed at 20% infill and 3d honeycomb. It needs cooling though as it prints otherwise it does sag but it does not have stringing or improperly formed areas. I like how easy it is to work with and how it does not clog in the extruder. What I don't like is how much cooling it needs. And it does need adhesive otherwise the prints fail. And it does have trouble with supports even at 10% so when it's printed on a different orientation that adhesive causes some visible imperfections but nothing that affects structure or strength. Recommended with caveats around cooling and supports.

It does it's job, and it does it well. Overall, I am happy with my purchase.I have a roll of clear TPU I had sitting in a non-air-tight bag for about 6 years in the basement and decided to see how bad moisture impacted it. (It was really bad, as can be seen in one of my pictures.) Threw it in the drier with the recommended settings and got impressive results; it dried out the filament and made it printable again.I also recently purchased a spool of Elegoo rapid PETG to try out the brand and was disappointed with its performance out of the box as it was laden with moisture. I would have been annoyed and writing an email to support because I had an unusable spool of filament, but this drier came in to save the day. Now I'm just annoyed, but at least I have a usable spool of filament.Having saved two spools and used this to guarantee an additional two spools in my collection were good to work with before large prints, I can say my investment has already paid off.(Included in my review are also thermal images of the drier running; it's pretty interesting to see the channel the hot air is blown through by the fans and how it heats the spools.)I am however disappointed with the quality of the touchscreen; it feels very cheap, has visual artifacts when pressing on it, and mine arrived cracked. (You can see some hairline cracks light up in the display itself when pressing on the screen to use the interface and they go away after a few seconds.) The screen is still fully functional, just looks bad when you need to touch it.

Works well with the bamboo A1, AMS. I was a bit disappointed, however because the color change is infrequent and you have to print something pretty big to see more than a couple of colors. We’ll keep it around because it’s a high-quality filament that prints well. I’m always looking for a project that uses a good amount of filament so I can see more colors.