Rear Bag Air Helper Spring Suspension Kit W217602071 3000-5000Lbs for 1969-1996 Ford for 1969-2002 Dodge GM Pickup for 1973-1987 Chevrolet GMC Trucks(Replaces Firestone Ride Rite 2071)

I got this kit for my truck to make it easier when I'm pulling my camper so far it is night and day difference the truck rides so much better and it only took about 3 hours to install the only downside is the instructions are far from disirable kinda hard to understand but if you take your time you can figure it out would recommend

Great kit, fast install maybe 2 hours. No cutting of the brackets as described in other review, there is big hole on back of frame they slip right in. Fast shipping

Installation on a 2018 F150 FX4 Supercrew with 6.5' bedKit is pretty easy to install. Removing the rear wheels and putting the truck on jack stands will provide the necessary access. Instructions are pretty clear and easy to follow. I tee'd my airbags together for easier fill up and to ensure both bags are at the same pressure, get a 1/4" push to connect plastic tee and you're all set. Tee-ing the airbags also means only one hole needed for the Schrader valve, the best place I found to mount it was the right side of the rear bumper near the license plate light.The biggest issue with the kit, in my opinion, is the u-bolts that secure the airbags to the leaf springs are way too long. I purchased 3/8" ID stainless spacers (https://www.amazon.com/dp/B0D2BJGQ9P?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1) which helped considerably (see pictures to view the difference). With the spacers installed, the u-bolts were able to be tightened before they ran out of thread.Make sure to use a few wraps of teflon tape on any air fittings threaded into metal. Also, get a good plastic tubing cutter or use a new utility knife/single edge razor blade to cut the tubing. A clean cut is required in order for the push-to-connect fittings to make a proper seal.

This is a good airbag system pretty easy to install it just the little pallets with the knot you have to cut it a little bit so you can fit in the holes for the frame of your truck otherwise you're not available to insert but that one I recommend cuz it's so easy to install

Worked perfectly on my 1996 Bronco!

I know every vehicle is different, but the kit I ordered does not fit my 99 F250 Super Duty without a mod to the brake lines. The bottom bracket for the airbags interferes with one of the steel brake lines. It cannot be installed without modifying the brake line. It cannot simply be relocated; it needs to be re-made. Disappointing. I missed the return window due to an injury that kept me from getting to this project. Lesson learned.

There very easy to install,You only need basic mechanical skills to complete

Installed the air bags on my truck per the instructions. Tested the air bags after installation, per the directions. I found one of the airbags to be defective and leaking air at the seam. Not able to get a replacement airbag, per Amazon representative. The only option is to remove the entire system from the truck and send it back for a refund. I would not recommend purchasing this product.