Bathtub Repair Kit, Enamel Tub Tile and Shower Tray Repair Kit, Waterproof Bathtub and Sink Repair Kit, Bathtub Crack Refinishing Kit to Repair Scratches, Holes, Cracks

SMALL PACKAGE CONTAINS 2 TUBES WHICH REQUIRE TO BE MIXED; ALSO TINY TUBS OF WHITE & BLACK "COLOUR" FOR MIXING IN TO ACHIEVE SHADE ADJUSTMENT (EXCELLENT ITEMS FOR INCLUSION SINCE NOT ALL WHITES ARE THE SAME !). PRODUCT SEEMS TO BE EXCELLENT (I USED IT ON A SMALL CHIP TO an 'ALLSTONE' SHOWER TRAY. ALL GOOD.PLENTY LEFT FOR NEXT ITEM.

A good product that’s easy to use- I didn’t get the white colour match needed - perhaps with more use I’d get that right? Good filler for sure

This is a great repair kit. My son dropped a bottle of aftershave out of the cabinet into the sink and it put a hole through the bottom of the sink only about three mil in diameter but it also threw a crack up the side my husband has used this to repair the sink as the sink matches our bath and toilet so was easier to repair the sink then buy a new bathroom suite!!! this has fixed it well although the area that he has filled looks like Matt toothpaste compared to the shiny porcelain sink. But I am just pleased we have been able to fix it at a cheap price.

Bot that goid

Our relatively new bathroom suite suffered a small chip to the ceramic sink basin. Whilst only a few millimetres wide, once seen, it could never be unseen. So this meant either paying several hundred pounds to have the unit replaced, or attempting to repair the chipped section.I figured that it made sense to attempt a repair first:This product proved to be outstanding, and after using it, the chipped section is now completely invisible, and the basin is as good as when it was new.The key reasons why I like this product are:1) It has quite a long cure time, needing to be left for 24 hours to set. This enables the two tubes of paste to be mixed really thoroughly. I mixed the stuff for a good few minutes to ensure that it set really hard.2) It does indeed set nice and hard.3) Luckily its colour matched our Roper Rhodes basin really well. So well that it is not possible to see where the paste was applied.I found that the following key aspects were necessary to get a really professional result:1) Ensure that the damaged area is thoroughly clean. I used methylated sprit on a lint free cotton cloth to clean the surrounding area.2) Work slowly with attention to detail.3) Apply the product thinly, as it is easier to apply a second layer if needed, than have to remove a lot of excess hardened filler.4) Crucially, I ditched the supplied abrasive and used my own wet and dry paper, used with water, and working down with several finer grades.5) I started with 400 grit paper and moved down to 600, 800, 1000, then the really fine 1500 grit paper.6) The 1000 grit paper should be used when you can feel that the surface of the filler is just a tiny bit proud of the surrounding ceramic surface.7) When moving down the grades of abrasive, use a fresh sheet of kitchen paper towel and fresh water to rinse/clean the abraded surface. Also dip the new bit of abrasive paper in fresh water (so as not to pick up any coarser particles from the previous grade of paper).8) For the final polishing, I used T Cut paste, followed by buffing with car wheel polish.All in all I am absolutely delighted with this product. It gets a 10 out of 10 from me and saved me several hundred pounds.

Used this for a large crack in a white sink. I spent some time mixing the white paint in to make sure it was the right match.At first it looked great and matched in well. After a few months the colour has changed and is now yellow.Wouldn't buy again.

Very simple to use, I've had this on my bath for 10 days and it appears to be doing the job, I had a large chip out of the surface that quickly became rusty it set solid and I can't see where the repair is now unless I look closely as there is a small bump that I couldn't smooth down fully. Very pleased.

Does the job