4 Packs Aluminum Chain Link Fence Gate Corners, Gate Elbow with 90 Degree Angle Design for 1-3/8" x 1-3/8" Outdoor Diameter Pipe, Pressed Gate Corner Include Bolts, Easy to Install on Gate

I turned a section of my chain link fence into a gate using these corner brackets. The poles slid right in and the brackets tightened up easily onto the poles. They seem to be decent quality and worked out well for what I needed.

Perfect for my needs. Much stronger than the broken ones I replaced and easy to install. If your fence is already wired up with chain link, it’s going to be tight to get the poles to match up. You can get a tool that pulls it all closer togeher but if you don’t have one of those, use ratchet straps to pull everything together until you can cap the poles and tighten it all up.Quick and easy job, solid repair.

Used these to make a gate for the garden. Works really good.

Needed these and they fit fence perfectly

I had an old gate which had a rusted out bottom pipe. I broke the elbow trying to remove the old rusted pipe. A new one of these looked a little different but was perfectly acceptable. I raised the gate a little to keep the bottom from touching the ground and causing more rust. With this set, I could have replaced all of the elbows, but the small difference didn't matter. The new elbow is aluminum and won't rust, but hopefully neither will the galvanized pipe now.

Works as designed

Just what I needed and a good price

Easy to use but be careful to not over tighten.