F FORITO [2PCS PACK] 15.6-Inch Laptop Anti Glare Screen Protector, Notebook Computer Anti-Glare Screen Guard Protector Compatible with HP/DELL/Asus/Acer/Sony/Samsung/Lenovo/Toshiba, Display 16:9

This is my second time buying this anti glare screen protector. It comes with 2 screens in a package, but don't expect to use it on 2 different laptops, there is 99% chance you will screw up BIG time on the first application and will have to use the second screen anyway.That's what happened to me. In fact, I screwed up on the first one, and on the second one .. just not as much.I still have at least 10 bubbles that I can't get out and dust bubbles in a few spots.Its a totally different story with the second purchase. I got better at applying it AND the included "squeegee" is 10 times better then a crappy cardboard one that I got in the first package.I learned from my mistakes, don't bother with instructions by the way, they are not quite clear, I will give some tips below.First screen protector I applied didn't come out too great, acceptable but I knew I could do better.I tossed first screen protector out and started over with the second screen protector.Result: 99% Flawless application, no air bubbles, no dust bubbles!This screen protector works as advertised, it does in fact reduce glare by a lot (if you typically see your own reflection when the screen is off, with this protector it will be reduced by at least 60%), it does repel dust, and it does protect your screen from scratches, however the actual screen protector does scratch so don't start testing it by scratching it all over :D.Application steps/tips:1. First clean your screen, use the included dust cloth, first by itself, and then spray either Isopropyl Alcohol on it, or dab it with Hand Sanitizer.The alcohol is great at removing any residue and finger prints your might have on the screen, as well as it evaporates very quickly.DON'T USE INCLUDED "dust removing" stickers, they will most likely stick to your screen and then you will have to remove the stickers from your screen and the residue it left behind, it happened to me both times.I also recommend wiping the screen with a good microfiber cloth right after, mostly just to get rid of any static (electricity) on your screen, or it instantly can become a dust magnet again and you really don't want that while applying your screen protector.2. Now take your screen protector. There are 3 layers, I repeat 3 layers! (I've seen some reviews of people claiming the protector is either too thin, or doesn't reduce glare, or scratches easily, that's most likely because those people tried to apply the 1st or 3rd layer)The layer your want, the actual protector, is in the center. A RED sticker is attached to the bottom layer. Remove the bottom layer ALL the way!..3. MOST IMPORTANT STEP. Carefully take your screen protector by the corners (try not to touch the bottom side at this point). Line up the screen protector with your screen at 2 corners (I recommend left top and bottom, or right top and bottom). Don't bother with the squeegee at this point, just line up the corners and slowly let the screen protector "unroll" to the other side of the screen. If you didn't line it up right, I wouldn't bother redoing it, might as well start over with the second protector that's in your package. If you peel it off to do it again, there is going to be static electricity at this point and you might get dust in between your protector and your screen causing a lot of dust bubbles all over the screen.4. Now get the squeegee out, if you got the same squeegee as me, it will be plastic on one end and soft cloth on the other, in which case only use the soft side. For bigger bubbles you have to be slow, for smaller bubbles you can just rub the actual bubbles back and forth with the corner of the squeegee and they will go away. As a reminder, the top layer of the screen protector is still on at this point. Don't remove it until the very end. You can "scratch" the bubbles out as hard as you want, you will see scratches on top of the top layer, don't worry.. it's not going to scratch your screen or the actual protector... scratch away, and get as many bubble out as possible.Here is a thing though.. You might have a lot of bubbles, but chances are half of those bubbles are between the screen protector and its top layer.5. Once you get most or all of the bubbles out, take the top layer (by the BLUE sticker) and remove it. Viola! You are done.Here is what to do with remaining bubbles if you have any.. Don't start scratching them away, place the protective layer you just removed back on top of those bubbles and get them out this way, one bubble at a time, you don't want to scratch your protector as this point.Get all the bubbles out, wipe your screen and you are done.

Very good.It works as described.

It was pretty easy to install, at first I didn't think that it was anti-glare, but that's because the outside films aren't anti-glare, but the inside one that you actually use is. Best was to install is clean the screen, get most of the dust off, line up the protector, put the two guide stickers on one of the short sides, then lift the protector using those stickers as a hinge and use the dust sticker to remove all dust near the side of the sticker-hinge, peel back the inside layer of film as little as possible and let that end start to adhear, while keeping the next part of the screen free from dust using the sticker, slowly peel that back layer more and let the protector adhear to the screen working slowly, do not unpeel the back layer all the way until you are really close to the end and are sure the end has no dust on it, then let it go. Use the card to push any air bubbles out (mine still has 1 tiny bubble that wouldn't come out).This is the tricky part when you peel off the front protector from the actual protector, make sure that you don't peel the actual protector off. I did that and then since it was completely off, there was no way to get it back on without dust getting stuck causing lots of bubbles. My first protector was ruined. But using what I learned I applied the second protector and it worked like a charm!

For the price you pay, this is absolutely amazing. I’m giving it 5 Stars, even though there are a few issues, (I just think the average rating should be at least a 4).Good things1 It does what it’s advertised to do. My screen was super reflective beforehand and was very difficult to work with when it was sunny outside and I was next to windows. This greatly reduces the glare (see attached photos)2 - it doesn’t seem to affect the screen colors/brightness that much3 - even with a few small bubbles it looks and works great.4 - It’s a 2 pack! If you need another one you already have it.5 - high quality for such a low price. Others were advertised at $30, but this definitely gets the job doneSlight negatives/tips1 - this is a big screen protector, it’s going to be somewhat difficult to lay it down without bubbles. Don’t peel the cover off of it right away. Try to get the sides lined up then start from one corner and peel the protective sheet off.I just grabbed some Grey Goose Vodka and a paper towel to wipe down my screen before hand. Worked alright.2 - Helps out a LOT, but is probably not designed for use in direct sunlight in the same way a laptop with a matte display does. (There’s a picture attached of me in my car in the sun. Compare the screens reflection to the reflection on the bezel around the screen). It does work a lot better than the reflective surface it was3 - sometimes fingerprints/smudges will stay on the protector (see the sunlight picture)I was skeptical purchasing this, but definitely recommend it or people with reflective screens.

The product description says that it fits 15.6 screen. But it doesn't fit my 15.6 Dell Inspiron 7000 touch laptop.I was really excited for finding the right product, but have regrettably realized later that it doesn't fit! The packaging was big enough for the screen but the screen guard itself is much smaller and doesn't cover the screen. Moreover the packaging mentions it as 15" and not 15.6". Then I thought maybe I ordered wrong product and rechecked my order. But the it's same.Moreover there is no mention of the bezel size of the screen which leads to confusion.Sadly I am returning the order. :(