Genuine Analog Joysticks Repair Kit for Xbox One - Fixes Stick Drift, Broken, and Loose Joysticks on Regular, S, X and Elite Series 1 Controllers (6 Pack)

If you are replacing your Xbox controller joystick, these are exactly what you need. They work well and I haven't experienced any drifting. The company even provides a detailed YouTube instructional video to help you.Just keep in mind that these are SPECIFICALLY designed for the Xbox controller, and they will always be sticky towards the edges due to the design of the faceplate on the controller. So if you are looking for a joystick that will work for a personal project, or anything other than an Xbox controller, look elsewhere.

Replaced stick on one of our 4 new controllers since Microsoft cheaped out on quality same as playstation (they give you a 3 month warranty so YEAH they know their QC for these is terrible - been like that since the XBox One days). Followed the video that maker provided and was able to get this installed and controller works perfectly now. As is called out - you need a Soldering iron, solder sucker and solder as well as a little finesse to get this done (I followed the cut up the old stick and remove in pieces method which worked great)

Four star is my fault for not understanding I needed more tools to complete the replacement. I thought this kit was everything I needed to fix the joysticks. You DO NEED soldering tools and equipment, I did not know this. My fault completely but i'll be returning the kit because its a job outside my ability. The other reviews look good but its not for me.

Great product and good quality

The kit comes with enough parts to repair three controllers and it also includes the tools needed to disassemble the controller. (My photo only shows two potentiometers because I took it after using the other 4 pots.) There’s also a link to a YouTube tutorial, but I didn’t use that.These joysticks worked great as a replacement for model 1914 and 1708 wireless Xbox controllers. It’s a well-known issue that the controllers will experience stick drift over time as the carbon wears out on the original joystick potentiometers. The only solution is to replace them or replace the entire controller. I’ve got 5 controllers that my family uses so I wanted to try fixing instead of replacing. If you don’t have the proper soldering and de-soldering equipment, then you won’t be able to execute the repair. Even with the right equipment, it’s not a trivial task so when these finally wear out - and they will, I’ll probably go with aftermarket controllers that use Hall effect sensors instead of these ALPS potentiometers.

Pretty sure theirs a lot of misleading positive reviews on this product . Trying this quick fix will only cost you more later. Avoid this and just buy another joystick save yourself time and money. Pro with soldering and these quick fixes won't work or last long, they'll set your joysticks way out of balance even after fine tuning. Spent hours trying to fine tune, used software etc and ended up with worse drifting then beforehand. A machine made the joystick motherboard with genuine parts and this is far from genuine .Tested on all versions of xbox, one, x, elite etc controllers and everyone on failed. wasted 3 days on repairs. use a another similar controller for parts instead.

Good quality, usable and easy to set-up!

My Xbox One controller was driving me crazy with drift on the left joystick. But to buy a new one? Being a cheapskate I opted for SOSS Analog Joystick Repair Kit. Why 3 stars? Because I could not find a path to guarantee that it could be installed and work as it should. I should say that I had the tools, pencil soldering iron, Superwick, multimeter, and a lot of time on my hands.I watched the SOSS videos. Seems to me that their 'calibration' is just a way to slightly turn the joystick tab so the potentiometer thinks it is centered when in fact the rod is slightly off-center. That's fine, except that after installation my problem was still extreme drift, not centering (drifting when calibration software showed inside deadzone). Their video said nothing about correcting for drift. Another video (and by inference, the 'old' SOSS calibration video) implied that the resistance between the left side and the right side of each potentiometer should be in balance. Made sense, but I tested all 12 of the potentiometers provided in the kit and only a couple came anywhere close to being matched (they differed by about 0.3K ohms left and right). I used those, being the hopeful sort.Installed trial and error, and it worked to perfection! Until... Extreme drift again (after an hour of play). This time I thought the joystick felt a bit more resistant to movement than the OEM stick, so I lubricated it (a touch of silicon spray) in the belief that it was not returning to true center. That seemed to do the trick, but it still feels fragile. Every once in awhile it will still start drifting again, and I have to rotate it and utter magic incantations until it straightens out.I should say that for simplicity's sake I used Steam calibration. When it works the deadzone is very small. When it does not work (drifting) even a quite large deadzone (over the 50% mark on the bar) does not solve it.So, the SOSS calibration only seems to go after centering, and it did not seem as sensitive to resistance balancing on each potentiometer as some have said. I can't give you an ironclad recipe for getting this thing to work except patience and trial and error.