iOttie Car Charger Easy One Touch Wireless 2 Qi Charging Dashboard Phone Mount for iPhone, Samsung Galaxy, Huawei, LG, Smartphones

My set up:A 2007 Ford F150.The iOttie easy one-touch wireless fast charging Car mount.A Samsung Galaxy S9 Plus. https://www.amazon.com/gp/product/B079JXY4TJ/ref=ppx_yo_dt_b_asin_title_o04__o00_s01?ie=UTF8&psc=1A Spigen Tough Armor Case for my S9 Plushttps://www.amazon.com/gp/product/B078BF68T2/ref=ppx_yo_dt_b_asin_title_o04__o00_s00?ie=UTF8&psc=1I wanted a charger that was easy quick to connect my phone up to. I also wanted a Car mount that I could use when I was using my phone as a GPS. A had two concerns when mounting to my truck. 1. Was my dash was slightly curved I was concerned the dashboard mounting pad would not be secure. I followed the instructions and the dashboard mounting pad that came with the unit works and is securely fastened to the dash. 2. Was I wanted a mount that I could adjust in and out telescoping so I could get the correct location over my dash but not to close to my steering wheel. This mount has a 3-inch adjustment range. I did have to adjust the lower foot to make sure my phone and wireless charge are aligned to the sweet spot for charging. I also adjust the foot off center t the right so I could also use my headphone jack to connect my phone to the AUX input on my stereo so I can listen to podcasts to and from work.Pros:1.Easy to install.2.Charges my phone fast and reliably.3.Fully adjustable.4.Comes with a 12vdc car charger that also has another USB connector to charge another device.5. On rough roads, my phone was secure and always was charging.Cons:1. Stability on very rough roads. I have my Dashmount fully extended it would be stable if I adjusted the mount to a shorter extension. While I don't have an issue with this the iOttie is completely on most good paved roads if you are on gravel or driving over railroad tracks it will be a little jumpy.2. My son has a Druid Turbo 2 that also has wireless charging. It worked but the charging was not stable over rough roads. We adjusted the mount to the sweet spot of the Druid and it worked fine even with his case. But to get a sweet spot for both phones was an issue. My truck so it is set up for my phone :)I would buy this mount again My wife saw my setup in my truck and has hinted that would be nice for her Honda CRV... She currently has a wired charger while ok it is not as quick or as easy especially at night to connect up for charging as the iOttie. So it looks like I will be ordering another (Happy Wife, Happy Life)I hope you found this review informative. Good Luck.

Update 01/20/18 – I received the replacement unit one day before I was expecting. It came by very fast and it works perfectly fine. The car holder portion is very solid and durable, the one hand trigger works really well in the charging works okay with my iPhone 8+, but my case interferes with the charger. Just as an observation, my wireless charger that I have on my desk charge of the phone with the case.The company also has not been overwhelming me with emails and they have not asked me to change my review. I am really happy with the service and definitely I will purchase from them again. I'm changing my review five starsUpdate 01/10/18 - Seller contacted me asking for relevant information and less than 2 hours after I provided the requested info, I received an email saying that they had processed the replacement. I am updating my review to 3 stars due to their immediate, courteous, and professional response. I will update later once the replacement is finished.The phone holder is of great quality, well-built and it holds the phone very securely in place. It is very easy to place the phone in the holder with one hand and remove it fast.The charger does not work. The USB cable that came with the unit doesn't fit properly in the port. When I use the USB cable that came with my Amazon tap, the fit is of good quality but the green light to that indicates that the charger is connected the power supply just flashes once and turns off. As it stands, it is a very expensive phone holder.I have emailed the seller and once I hear back from them I will update my review.

I've had this for four days so far, but I've been on the road a lot, and I am very happy so far.I actually bought two versions: one with the suction cup mount for my car, and one with the CD slot/vent clamp for my work truck.I've gotta say, they work well. The build quality is actually very good. Wireless works as expected (10 watt charge rate - see below).The one handed feature is VERY nice. My old mount required me to use two hands. This one you can place and remove the phone with one hand and it's quite securely locked in. In my photo, you can see a button in the center of the mount. When you put the phone in the mount, it presses against that button, and that triggers a spring mechanism that clamps the phone. To release the phone, you squeeze the buttons sticking out on either side, which also re-arms the spring mechanism. Very quick and simple to use.The suction cup, which is usually flimsy on these things, feels very thick and robust. How well it holds up in hot Florida summers will take time to tell, but I bought another, non-wireless version of this mount, as a spare for the RV and also to steal the suction cup arm off it if needed. If you notice in my photo below, I have the mount resting on the dash. People always complain about the suction cup giving out. Well if the phone is unsupported, and it just bounces around at every bump in the road, that arm is going to act like a lever and pry it off.I opted to attach the mount to the window so I don't discolor the dash, but it can be used on the dash. There's also a disc included with that strong 3m double stick tape (the tape they use on Go Pro mounts) that you can use on dashes with rough textures: you stick the disc to the dash and then attach the suction cup to the disc.The vent clip mount actually works well and is what I used on the work truck. I generally don't like using a vent clip, but this one grabs really tight, and the truck has some beefy vent slats.The CD mount, which at first I was skeptical about, actually works very well if you bother to read the instructions (which I didn't at first) and realize there's a lever on the bottom that you need to turn to lock it into the slot tightly. The CD slot mount wasn't really practical on any of my cars as it would block the entertainment center display, but a good idea for an older car with a more traditional radio.The charge rate is not very fast - it's 10 watts, which is enough to keep the phone up. But if the phone was nearly dead and I needed a fast recharge, I have a high speed plug-in charger in the glove box. That charge rate is pretty standard for car wireless chargers, and the Pixel 6 only supports up to 15 watts wireless charging on 3rd party chargers. Only Google's proprietary wireless charger runs at the higher 23+ watts.-------Followup 8/3/22: I had to stop using the wireless charging feature because it interferes with the Bluetooth between my phone and the car entertainment system. I can't say this is a problem with the charger as I've Googled the issue and not found any known issues with wireless chargers and BT except for iPhones in a few rare cases (I'm using a Pixel 6), so it may be the entertainment system in my car (2012 Lincoln) that's sensitive to it. BT works but while playing a podcast or music, the pause button will come on and off on it's own, repeatedly. I can actually see the pause indicator on the entertainment system display coming on and off, so I know it's not an audio issue. Disconnecting power from the charger makes it go away. I tried raising the charger higher off the dash and it didn't help. Moving it to the left of the steering wheel seemed to help, but that's not a comfortable location for me.So just a head's up, if your BT playback is acting up, try disabling the charger.I actually switched the unit out for the non-wireless charging version I bought as a spare, and I'm using the wireless charger in my 2013 Yukon with no problem.I do love the cradle itself. It's a very good design, and the one handed operation of placing the phone in the cradle and removing it make this well worth it. Pity I can't use the charger in my car though.