25pcs Zip Clip Buckle Zipper Pulls Cord Rope Ends Lock Black for Paracord FLC135-B

These match perfectly the zipper pulls on one of my range bags. Adding paradors zipper pulls to all of my soft sided tool and gun bags and pistol cases.Delivered on time and all there.

Good product. A little hard to work with when you have bigger hands!

They work fine, but are a bit bulky for shoe laces. Work great on zipper pulls.

I used this when replacing some very worn 1/8" shock / bungee cord on a pair of bike saddlebags I had purchased used. (I initially got a different product which was for 550 cord; I miscalculated and though the other product would fit, but it didn't close firmly.) These are a bit fiddly to fasten on the 18" cord, which is no great surprise since they have to be very secure, but I did momentarily wonder if I'd gotten the wrong product again. Once I got the cord ends in place, the cap closed up nicely and securely. (I had to use two, one on each saddlebag: one of the caps fit together by hand with some force; the second required a bit more force, but a little pressure from some channel lock pliers closed it up nicely.) I just completed this repair and thus cannot speak from experience that these will remain secure, but they seem very secure, and sturdy, so I'm feeling quite confident about them. Happy enough with the aesthetics as well.

They work great for a bit... but don't trust them to stay in place for long. Kept falling of my purse and jacket.

These items work great when you figure out how to work with the paracord and the pieces of the clip buckle assembly:1. Open the top T piece by inserting a small screw driver to open up the jaws.2. Insert the paracord loop into the lower assembly and heat with a lighter/butane torch.3. Insert the paracord ends into the open T and remove the small screw driver.4. Press the T into the lower assembly using a channel lock wrench with Duct Tape on both jaws (prevents marring).Makes a rock solid pull.

These zipper pull ends work great. I would recommend them.

Made new pockets for our son's boat. The original pocket design did not allow for replacing the stretch cord at the top of the pocket. It's a matter of time, temperature, humidity and use before the elasticity breaks down degrading the usefulness of the pocket. By using these clips, it's fairly simple to replace the bungee cords.