🔧 Connect with Confidence!
The Hyber&Cara 20 Pair JST XH 2.54 mm 2 Pin Male and Female Micro Connector Plug set features 100% silicone insulated wires, designed for high current applications. Each wire is 10 cm long, prestripped, and pretinned for immediate use. With a total of 40 connectors, this set is perfect for DIY electronics, 3D printing, and radio control hobbies.
C**E
Very handy
Very handy for connecting too wires together but you also need to separate the parts now and then, very good material used and I have had no issues at all
A**.
Wiring is wrong way around, Red is neg
Besides the wrong connection. These are good for over 3 Amps, presently testing at 5.3 amps, running a little warm but not hot. still 15 min to go after 20 min initial test.Pleasantly surprised, estimate temp of plug & wires at 28 C.If this works, Magic, I will know the limit to these. Can then do away with screw/quick connectors, prefer soldered connections.Passed the test, Great.
H**Y
Better than expected.
I saw the negative reviews which seemed to be about polarity/ colour. It wasn't an issue for my application, but even so, they are all fine, every last one as described and well made.I would certainly recommend these, an excellent little alternative to trying to make up my own connectors.
S**N
Great quality
Perfect, nice soft silicone leads
K**R
They work.
Just what I needed
A**S
Wires came the wrong way round
I saw some reviews from 2022 and thought that the wirirng issue would have been fixed by now but I was wrong. They are value for money but remember wires are the wrong way round.
B**R
Connectors
Should have been delivered Mon 7th did not receive until We'd 9th apart from that good item.
H**N
Wired the wrong way round - CHECK BEFORE BUYING!
I was stupid enough to not read the reviews, or I too would have seen that they had been miswired (red and black swapped compared to normal), which makes them frustratingly unhelpful for my purpose.If you really don't care which way round they are - for instance if you're wiring something up from scratch - these would be OK, but in my case I'm wiring into existing equipment (3d printer and fans) which all have the red/black the standard way round, so these are almost useless.
ترست بايلوت
منذ شهرين
منذ شهرين