HHIP 3402-0209 8" x 6" x 5" Slotted Angle Plate, Opened

There were still some burrs on the edges, but the important faces are clean and square to each other. I would happily buy again.

As is out of the box ...The working faces all have burr edges akin to a woodworking cabinet scraper.Both the face and back side of all the slots have pronounced burr edges that are scalpel sharp.These may work for the hobby machinist willing to invest a fair amount of time in cleaning them up.They’re no bargain if you’re paying an employee machinist wages to make them safe and useable.

A little rough grinding and burrs around the edges, but otherwise pretty good. I may scrape it in later.

This angle plate was well packed and padded. The metal is rough on the inside surfaces, but smooth where it is needed to be. All edges and slots did benefit from deburring and sanding. My test indicator has a .0005" resolution. The needle moved about half of that while measuring vertical accuracy. This angle plate suits my home-hobby machine shop!

Great value, nice sharp corners, would buy again.

Flat surfaces, clean edges, works as expected.

The angle plate only has a fraction of the slots its supposed to have. As the pictures attached show, the plate only has a total of 5 slots in it, as opposed to the 12 slots its advertised as having. The additional slots that are missing are crucial when needing to fixture oddball sized and shaped parts. The plate also arrived with several gouges and dings. After sending the angle plate back and asking for an angle plate with the proper amount of slots in it, I received yet another that also is missing slots. This is extremely sloppy manufacturing and quality control. Buyer beware.

buyer beware. if you are looking for something accurate.. keep looking this is junk. not within stated accuracy and mine was damaged. not from shipping as the boxes and internal wrapping were in good shape