Compatible with 2015-2023 Dodge Charger Tail Light Tint Kit precut Dark Black Smoke Overlays. Vinyl taillight Accessories

So much cleaner look I 100% recommend. Super easily installation did it outside in the wind not a single bubble or crease no heat used.

So easy to install !! Made my R/T look mean from the back

very well packaged and very good quality!

Great fitment. Very good durability and not too dark

The overall quality is great, and it is a precise fit. The adhesive it uses requires more than the instructed temperature. I would advise using a heat gun or hairdryer to ensure the adhesive works as intended. Also, be sure to leave plenty hanging over the inside edges to wrap around or it will stick back up after a little bit.

Watched some videos on YouTube just to make sure I did it right, even though it seems simple. No such thing as being too safe, so you don't have to buy more for screwing up!I will say,on the two outside lights, start from the corner furthest in the outside, and work your way in, and line it up as is, if done right, you may have a little overlap in the trunk, so make sure your trunk is open!Next, do the two insides, again start from the furthest point away from the trunk when installing, and work your way inward toward the trunk, and again if don't right, you may have overlap in it. Which is fine! Watch a YouTube video on these specific ones!You do NOT need water. Did it first try once, because I didn't rush and I took my time! No water, and it's been in for months, no issues. Took it through the car wash so many times. 0 issues!Hope that helps! 👍🏻

I would suggest anyone to install from the outside to the trunk, and the ones on the trunk, from the trunk to the side of the car. A heat gun will really help you. First time installing something like this and i did it without a heat gun and it came out perfect, so i would assume that anyone with a heat gun would have less chances of making a mistake specially because if you do heat it up (seen this in videos) you can peel it off a couple of more times to reposition it if you make a mistake. Lastly do not start intall without washing the area very good and after if you have a claybar, alcohol, or goo gone use it after the wash to ensure a much much better bond of the adhesive. Last tip, I was my car at night and the day after when it got really sunny I made my install helping myself with the heat of the sun sence I didn't have a heat gun.

Loved this product! The cuts are the perfect shape and a little oversized to give you some forgiveness in installation (they don’t have to be PERFECTLY lined up since the area being tinted is flat on all but one side) as well as gives you some room to wrap around in between the light and the trunk for added adhesion. Installation couldn’t have been any easier! I installed in colder weather (about 40 degrees) which is not recommended but if you use a hair dryer or heat gun to keep the vinyl slightly warm during and after install you shouldn’t have any issues. Definitely worth the buy; great company, great customer service, and fast shipping. Completely changes the rear end of your charger! 11/10 would recommend. It’s only been a few days since installation but I am not seeing any bubbling peeling or movement.