Bob Smith Industries BSI-131H Insta-Cure Thin Super Glue, 1 oz.

I make small wood boxes with box joint corners. I assemble the boxes dry and clamp them in final configuration(be sure it is square) THEN I apply this glue to the corners. Capillary action sucks the glue into the joints and the box is glued in one minute!Wear gloves and safety glasses when using this product. The stuff will glue your fingers together, in fact it was developed for wound closure.

Good CA glue as expected. Everything BSI makes is pretty solid for hobby and home use.The only gripe (as with many CA glue bottles), is unless you keep the tip perfectly clear of glue, it WILL harden and build up, ruining the seal on the cap. Keep it clean, and it wont be a problem (granted, Henkel bottles tend to be less picky).

I purchased Bob Smith Industries BSI-131H glue to seal split seams on my rubber Muck boots. Tonight I applied a small amount to each seam and covered them with Duck Tape to hold the seams closed. I need emit have bothered with the tape because, just like the manufacturer states, this glue starts to set in three to four seconds! I am really impressed.

First and foremost, don't listen to whatever it says on the bottle. You don't have 1-3 seconds for it to set. It really is instant as its name suggests.The first time I used this to glue some balsa together, I tried to slide one piece to position it but as soon as it touched the glue, it stuck. Had to use a razor blade to detach them. I put a bit of glue on an end of the wood that was fraying and I could literally see smoke come from the bonds before I even put the piece I actually wanted to glue.This stuff is STRONG and you do not want it anywhere near your fingers. Even when I touch a dry part of the balsa to press pieces together, the glue will find some way to soak through the wood and glue it to my fingers. I used it to glue 2 sheets together, and somehow enough glue soaked through a sheet to get it stuck to my cutting mat. I spent over an hour with razor blades trying to get it apart, and ended up ruining my cutting mat.Overall it is a very good glue, and super strong, but just extremely difficult to work with. I'd say its consistency is thinner than water. 4 stars because the applicator tip is separate from the bottle and the tip is still too big and makes the flow hard to control.

- Well, when they say "INSTA-cure", they mean it! This CA adhesive sets super-fast. Like all fast-curing CA adhesives, it's very fluid, and I've found it best to use as thins a tip as possible to deliver as little as possible, especially since a little goes a long way. - This CA adhesive also seems to have less of an odor, and to set more quickly, than other 'instant' CA glues I've used in the past. - It's also lasting well - I use very little, since I'm making things that are little ;) , so it's nice that the adhesive is still remaining fluid!

If you're looking for an nearly instant/permanent bonding solution, this is for you. Keep in mind you have to act fast in that it bonds in 3-4 seconds (it felt even faster to me). I made the mistake of not wearing latex gloves while using this and nearly glued a couple of my fingers together ; )!

Worked perfect for what it's designed for, super thin so it wicks right into a small crack and bonds right away. I used it to repair a small hairline crack in a wooden rifle stock, and a broken vacuum cleaner attachment. In both cases the adhesive ran exactly where I needed it and nowhere else.

I am glad I purchased this glue! It is a form of super glue, but it does seem to set much faster than regular glue, especially when I use a UV light. Not only sets fast, but it seems to form a very strong, durable bond.