Universal Front Bumper Spoiler Lips Guard Protection Length 2.5M/8.2FT

Very good quality, useful that 3M double sided tape was used. Highly recommended. Adhered on very well if you know what your doing. I have a few tips below if its your first time installing one. Read them all so you have an idea. Follow these steps an you'll be happy, trust me. #1 Unroll the lip, lay it flat, and straight. Lay it in a way so it doesn't curl back on its self. You may have to ether lay it out with the tape side up or down. Ether way do this over the night before you install. Dont place any weights on the lip, if you do you'll deform it. An dont reroll it back up, leave it till your ready to install the next day. #2 If you can, an are able to remove your front bumper do it. Makes things alot easier when installing the lip. Especially when you flip the bumper unside down. That way you can see the entire bumper at once, not just a foot at a time when crawling on your hands, knees or back. #3 Clean, dry, clean, an let dry again. Clean the bumper especially where you plan to place the lip. Use sponge or microfiber cloth with soapy water to clean area of dirt and grease. Then dry off with dry microfiber cloth. Then use some isopropyl (50%-90% alcohol) to wipe down the area again. Let it air dry. This will help with the tape adhesion. #4 If you have a heat gun use it. If you dont have a heat gun. Use a hairdryer, or the very dependable sun to heat up the bumper and the lip Id recommend 30-45 minutes in the sun. Also if using the sun install in the sun as well to keep the heat on at all times. Also if your going to use the sun to heat them up. Lay the lip out flat, and straight in the sun just like you did the night before. While you remove the bumper from your car if you do go that route. I do recommend removing the bumper, extra step but saves you some major headaches. If using heatgun/ hairdryer remove about 12-18 inches of the tape peel at a time. Then use heatgun/ hairdryer to heat it up, as well as the location where it will be installed. I find it easier to heat the area on the bumper first then the tape. 6 back an forth passes on each should be fine. Shouldn't be searing hot to the touch, but just drinkable hot coffee hot. If that makes any sense to you. Then place the lip carefully on the area you want it push down to make sure it adheres. Go slow dont rush, the tape when heated up will stick like crazy. Thats why you go about a foot at a time. Dont remove the entire tape peel at once. Thats a nightmare. #5 Once its done. Use ether supplied screws if they come with the lip. Sorry dont remember if they came with it. If not some tack screws with some washers will do. Use them at every 2 feet, if so you should end up using about 5-6 screws an washers. Depending on how wide/ long your lip run ends up being. Thats it your done with the install, just reinstall the bumper back on the car if you did remove it.

Just installed this on my E350 Mercedes, and I am having a hard time understanding why people are saying this is garbage..?! Yes, it smells bad.. Yes, it comes coiled up, so leave it unrolled overnight and you're golden. I decided to try this out because (gasp!) the front of my car has been scraped by a curb (cringe). While using the prep pad, I laid the product, adhesion side up, in the warm Florida sun for 10 minutes. 5 minutes later it was installed, and the 3M adhesion tape gripped hard. Haven't driven it just yet, but that tape was so sticky, it'd be a miracle if it doesn't hold.. I chose NOT to use the screws to drill in to my Mercedes.. Give it a try, looks pretty dope!

Easy to install, you'll need a good cutting tool to trim the ends.. adhesive is pretty strong but make sure to clean the surface with good alcohol first.. goes on easy, looks great.

Looks great, works great! (See before and after pictures) Recommended product.

did not stay on not durabile

Tape doesn't stick well at all, used alcohol scrub but would not hold without contact adhesive and fasteners.

Excelente producto

Great best for the buck , i put it on with the adhesive it came with and it holds i went very fast and it didint even budge, i get compliments and asked where i get it from, imma buy more feom them probably the thicker one after thos one rips off from my car being slammed asf 10/10 would recommend