Master Airbrush G233 Performance Pro Airbrush Kit with 3 Nozzle Sets (0.2, 0.3 & 0.5mm Needles, Fluid Tips & Air Caps), Gravity Dual Action - Air Brush Guns for Painting, Aerografo Body Art & Cake

This is a great, easy to use airbrush compared to the original model that Master Airbrush made. The twist off tail really helps with adjusting and controlling flow. Also, the fact that you get 3 needles and nozzles for this price is cannot be beat. Cleaning the airbrush is a bit difficult because the cup does not come off, but if you take care of it, this will last you a long time. Paint must be properly thinned to be used in an airbrush. I have found no issues with paint clogging or hindering the nozzle.

Excelente!

This is a great product. I am NOT a deeply skilled airbrusher, so who knows what is "missing" in this AB, but my experience has been really positive. I have owned for years a nice Iwata HP-C. It was great for the small scale detail I used it for, but I am starting to have a need for something for larger pieces. Started researching options, including the Iwata's with larger needles and tips. Rather than drop another $140 or so on another Iwata, I figured for under $30 I sould at least give this a shot. Worst case I figured it would end up being suitable for at least priming. My surprise has been how effective this has been for general airbrushing l. Building up a 1/24 scale car model, this was fine for priming and painting bot small and large items. Good control of paint and pressure, and I am getitng an excellent mirror finish on Alclad Metals. May swap out to the larger needle that comes with it for the body, but so far the middle one (.3mm I think) has been fine. It breaks down easily for cleaning. I have some concern over the seals. They seem like they might be lost easily, so I just need to be careful. The Iwata in general has MUCH tighter tolerances, so I have no fear of this with that brush. The action of the actuator is also a bit "looser" than the Iwata, but honestly it was more of a "feel" issue than actually impacting performance. I found it easy get used to the slight need to account for the slack before it begins to meter the air or paint. The way the reservoir is set up is also a bit harder to clean. This may be a factor of the larger paint reservoir as the HP-C is quite small. I am not familiar with the larger reservoir Iwata models, so could be the same. It is not impossible, but will require more effort as there is a deeper groove/channel at the bottom of the reservoir where the needle runs. Paint tends to pool up here, and it is not as smooth or easy to get your cleaning brush/Q-Tip down there. Design-wise it is really a copy of the more expensive models. If you have used an Iwata or Paasch it takes almost no tiem to be used to how this one is used, or breaks down for cleaning.Time will tell if it holds up, but it does not seem any more flimsy than my old AB. Except for slightly more slop in the actuator, the overall build is very solid.

This product was wonderful. It came with all it’s a little kit inside of a carrying case which made it easy for storage, and it was heavy for that size I was actually very impressed it was it was heavy in the hand, and very heavy to weight wise, which indicates OK quality I mean you never know, but it looks to be pretty good quality, and it was so amazingly easy to use. I just hooked it right up to my little mini compressor that I have that again it was a master, so it was designed to go with this specific unit And it was really simple. I’m still learning a little bit about the PSI and the amount of coverage and how to kind of make more universal coverage but that’ll come in time but really I really love using this so much so that I was literally kind of sad when I had to wash wash it up and put it in wash it up and you know take it apart and wash it up And to be honest, all you really need is soap and water. It’s really easy to clean but you know just making sure that there were no clots or clogs or anything but it just was so good to use and so easy to use. It works like a dream and I loved it like I said, I still have to work with it you know and learning how to do you know how much to spray, and how much not to spray and how to get a find coverage of for just a base coat or some thing but that’ll just be time and I’m looking forward to it

I had one of these from when I was gifted an airbrush set for Father's day 3 years ago. Unfortunately I lost it when I recently moved and couldn't find it, so I ended up buying a other one. I recommend buying this one because it has different needle sizes so it'll adjust to your project, which is an upgrade from my previous air brush. This thing is a work horse, I use it to prime my miniatures and also paint them with a sick workup for a nice transition. I can continuously keep using the air brush without clogging and it cleans super easy... allowing me to change my color on the fly. It's a great starter brush as well. If you're new to your hobby or a beginner and want a solid air brush to get started, this is a great brush to buy!

I have a iwata neo and it just wasn't working out. It's twice this price point by the way. It clogs super easy and has just tons of issues. Hard as hell to clean as well. I figured I would give this a chance and glad I did. I paint models. I tried the .5 needle and .3. Too loose for my application but .3 almost worked. .2 is what I am used to. .3 would splatter paint a bit and not allow for precision. I switched to the .2 and it's precision is really good. I'm actually shocked how good it is. I thought it would splatter and be difficult to clean etc. I thought major compromise going from an iwata to this. Actually the opposite. It's better than my iwata ever was. It moves pain and air much better than the iwata. Iwata always needed to run at higher psi and again...super prone to jamming. This design seems to be superior. It's not as tight of tolerance most likely but news flash...paint dries fast when being pushed with air. You don't want the tolerance too tight or you won't get paint out. Yeah Iwata...pay attention. This airbrush is absolutely worth the money and then some. Buy it.

J’utilise cet aérographe pour peindre des figurines, et il fonctionne vraiment très bien. Le jet est constant, précis, et il est facile à contrôler même pour les détails plus fins. Le nettoyage est simple aussi, à condition de le faire tout de suite après l’utilisation pour éviter que la peinture ne sèche à l’intérieur. En prenant cette habitude, tout reste propre et l’aérographe dure longtemps. Rien à dire de négatif : excellent rapport qualité-prix, et parfait pour le modélisme.

It has everything you need to start airbrushing! probably more that what is required...worth the price. the quality is adequate for its price which is good. make sure you also get a nozzle cleaner! quick connector is provided in the box use it...i didn't, came to know about it after an year 😅

Un buen aerógrafo para principiante. Versátil y fácil de limpiar. No se puede pedir mas por el precio.

Prodotto ottimo, come da descrizione. Venditore disponibile è davvero TOP nel risolvere in modo veloce e puntuale un problema dovuto al corriere! Consigliato sia l’ottimo aerografo che il venditore 🤩

I've only had a chance to use the air brush once, but once I got my paint mixed correctly, it worked very well. I'm coming from an old single action Badger, so this is a big change. I really like the quick release, and the cleaning is much easier. It took a quarter of the time it takes to clean the old Badger. Being able to fine tune the flow is awesome. This completely changes the way I interact with my painting. Very happy!