Speedokote Automotive High Build 2K Urethane Primer Gray Gallon Kit SMR-210/211, Activator is included. For California, Delaware, or Maryland, order SMR-221/222.

This primer is pretty darn good for the price.. It is a little thick for HVLP gun with 4.0 tip so I thinned it 5% and used three coats.. It was still a good build thickness and was able to block sand with 600 grit, wet and it left a nice, smooth surface. It sands easily. So far after being painted, I don't see any shrinkage or dry back spots. It's been a month and so far so good.. I would have to say it's better than I thought it would be. For a user friendly primer at a cheaper price, I definitely recommend it!

good product, but can not build it up very thick. As long as you use it within its boundaries its great.

Primer worked great. Repainting my old jeep and the doors were from a diff vehicle, so they were a dark camo color. It covered everything amazingly well. Even hid some of the imperfections and dents to some extent. I used about half the gallon for this.

Lays down nice ,good coverage and sands fine

This stuff does great. I get excellent results spraying one medium coat. Tip for anyone looking at this, yes it is thick, but I reduce it 4:1:10% and it does fine in my Spectrum HVLP at around 24psi

I tell you WHAT!!!, It's all about the prep. I've been using these paint products for years, and it's all about the preparation. Great stuff easy sanding and pending on thickness build up is good for 36 scratches

i use this primer a lot at home on my own stuff. i think its the best primer money can buy. i see some reviews saying its too thick. i spray it out of my SATA jet RP gun with a 1.3 inner head and needle. it lays down and sprays great. i recommend any speedo cote product to anyone. I've also used the clearcoat. That buffs nice and hold a beautiful shine.

Great price