Inforce APL Pistol Mounted Light, Black Body, Constant/Momentary White Light., Black, INF-APL-B-W

I purchased this light for my HK VP9. I had seen pictures of it while searching for a weapon right, and I liked how this light complimented the looks of my pistol. The one I recieved was the Gen. 2 (with the screw, not the latch-like device, see pictures). I had heard horror stories about the Gen. 1 falling off while shooting, but the Gen. 2 has stayed tight through about 400 rounds so far without needing to be tightened, and I don't foresee having to tighten it anytime soon.The dimensions of this light are perfect for my pistol, as I didn't want too much added length or width. The light adds minimal length, and it's width is almost exactly the same as the width of my pistol.This light has a shut-off feature that deactivates the switches by turning the face of the light a quarter turn, perfect for those who like to transport their weapons in a range bag with other weapons or gear jostling around the bag. As for the switches themselves, they are paddle-style switches on either side of the trigger guard. I preferred this style of switch because I find them easier to activate than some of the toggle-style switches on other lights.The light is more than adequate for proper acquisition in low/no light situations; bright enough to see your target and get a proper sight picture, but not so bright that it end up blinding you or ruining your night vision. Spill is just right. This device is also very light, I barely notice the difference in weight. This device came set up to attach directly to 1913 Picatinny-style rails, but can also be configured to attach to universal rails after removing a small adaptor piece from the mounting surface. It runs on only one battery, which reduces size, but also reduces run time to about 1.5 hours.One of the best features is the price! Having a couple Surefires from my time in the military, I wasn't willing to shell out $400 for a light. The Inforce APL is priced very competitively, but is worth well above the price I paid.PROS:-Great price-Ergonomic paddle switches-Compact-Shutoff feature-Perfect amount of light-Secures very tightlyCONS:-One battery = about 1.5 hours of operating time-Website states that it will NOT fit the Beretta PX4 Storm or the HK USP

A great weapon light for pistols. Lightweight and easy to mount, and it even has a backup mounting key stored in the body of the light.The description say black body, but the pictures make it very clear; it isn't exactly "black" is has black parts, the lens crown, the mounting clamps, but the main body is more of a slate grey.This light is also extremely easy to use, especially since it's ambidextrous. There are two easy to reach and reach to press paddles. If you want a constant on one tap on either paddle and the light is sighting bright! Another tap and the lights off. Only need a quick momentary light? Press down a paddle and hold it down an the light stays on as long as you hold it.Now the ONLY reason I had to knock off a star.... NO STROBE! While some may say you don't need strobe It's a standard on a majority of lights in this price range and I think if it had that third feature, it would be a real tough piece to beat.Regardless of the strobe the InForce APL is still really really good and it is definitely money well spent. It has found a permanent home on my G17 and will continue to ride along until I can find something that can top the APL across the board. I don't really see that happening unless I'm forking over a lot more money.

I really want to love this light. I bought this for my Glock 19 gen 4 after first getting a surefire x300 (too long) and a TLR-1 HL (too wide) and the Inforce APL really is the perfect size, perfect aesthetics, and has the most natural trigger mechanism between the three. HOWEVER, the reason why I can only give 3 stars is because the light fits LOOSE on my Glock! I can physically move the light back and forth on my Glock and that's at the absolute tightest you can screw it in (I got the gen 2 version).I quickly figured out that the problem is the size of rail bar on the APL. The APL's rail bar is thinner than the rail cavity of the Glock so there is room for the entire light to move back and forth when fully seated on the Glock. What about the included 1913 rail adapters you ask? I tried that and the included adapters make the rail bar too big to even fit onto the Glock rail so that's not an option. Ultimately in order for me to get the light to fit right without movement I had to wedge a small piece of paper folded over Between the rail bar and the rail cavity. That's not a huge inconvenience but it is unnecessary. I have considered that I just got a bad one and that they all don't have that issue which is why I plan to contact Inforce about it. Will update my review with what they say.

Bought one of these to try it out, based on other reviews that I had seen online. I had a Streamlight TLR1 and was happy with it, but wanted something with a shorter overall length. Product came in a plain white box with no frills. I opened it up and played with it for a minute and then got straight to work. I mounted it up and was very happy with the size. Length is about a quarter inch shorter than the Streamlight and the width was about one eight inch narrower. It uses only one battery, but the lumen rating is as good as the TLR1 and the runtime is comparable. Probably due to a newer, more efficient led. Side by side comparison of the two beams showed that the brightness was about the same, but I liked the eveness of the InForce better. I prefer the paddle switches on the InForce to those on the TLR1. I also like the fact that you can change the battery on the InForce faster and without removing it from the weapon. I liked it so much that I bought another one a week later and sold the Streamlight. The only downside to this light is the lack of manufacturers making a compatible holster. Hopefully that will improve over time, since this light is still relatively new to the market compared to the TLR1 and Surefire lights.