EaseLife6.6 FT Double Door Sliding Barn Door Hardware Track Kit,Basic J Pulley,Heavy Duty,Slide Smoothly Quietly,Easy Install (6.6FT Track Kit for Double 20" Wide Door)

Could not have been more pleased. The bedroom door from the hallway would catch on the handle of the closet if the closet door was open. A bad design from the start, but after numerous repairs (teenage daughter's room) I decided converting the doors to barn doors would solve the issue. The kit is complete and well package. The instructions were clear and concise, not necessarily in the right order, but looking at it you can easily tell what you need to do. It took a few modifications, as I didn't want to remove the top frame molding nor purchase new doors. I measured carefully and by installing one bolt first at the end, I could then rotate up to secure the 2nd bolt. This allowed me to work by myself and take my time. I had to ordered a better wall mounted bottom roller guide (same company). The doors hangs a little high, removing the molding would have solved this, but more work than I was ready to tackle now. Since, it was a closet the couple of inches didn't really matter. The railing system is great, well made, sturdy, quiet, and the appearance is perfect. Plus, no more broken door handles!

I built two ‘barn doors’ for our church to cover the opening from the kitchen to the fellowship center. The doors were roughly 4’ square, each. This hardware was a breeze to work with. As others have said, there are no written instructions, just pictures, but if you are handy enough to hang a door, you are handy enough to figure that out. Also, a millimeter to inch conversion app may be helpful for you as all the given measurements are in mm.As a word to the wise, you may want to figure out where the roller stops will go and put them on the track before mounting the track to the wall. This is the first set of sliding door hardware I’ve installed and didn’t think that far in advance. It’s not really a big deal if you don’t add them to the track first, but then you will have to slide the stop onto the end of the track, remove a bolt, slide the stop past the bolt, replace the bolt and repeat until the stop is where you want it. Not difficult, but a pain none the less. Also, there are left and right stops, which may not be obvious if you have not installed one before. The Allen wrenches that comes with the kit are not good, you should have another set of Allen wrenches as these will strip pretty quickly.I was very pleased with this set of hardware. Considering how affordable it is, I had some reservations but was pleasantly surprised at how easy it is to install and how well it works. I would highly recommend this set.

We bought this kit to hang double barn doors on our pantry. Overall, the kit is great and the instructions are clear enough. However, hanging the tracks level requires a great deal of precision as being off even just a tiny bit leads to your doors sliding on their own (we're in a 1950's farmhouse, so nothing about our house is square or level). The doors slide so smoothly that if the tracks are tilted at all, the doors will slide. This is probably true of most barn door kits and not an issue specific to this kit, but beware that if you think hanging this will be easy, it is not. (We decided to build the doors ourselves, which also didn't make the project any easier). Overall, great value and very aesthetically pleasing!

The heavy duty materials are better than expected. The mounting into sheetrock with anchirs was not feasible. The holes did not lign up with studs. I had to use an alternative method to support rail.

Hardware installation according to instructions: just fine. Recycled our old bathroom doors (cheap, hollow doors...nothing to lose if the recycled door idea failed). Sanded stained doors, painted one side at a time, then made shallow, fake grooves to resemble individual wood boards with Dremel. Attached a thin board in the middle of each door and a strip at the tops so doors wouldn't splinter when drilled...and they will; also adds to looks and helps with doors' support. Made a paper template so the four sets of holes into the two doors would be in the same location (hopefully). Added a 1"x4"x8' header board onto wall centered over door opening so hardware and doors would be centered over doorway, not over studs. Second person extremely helpful (probably necessary) for attaching any items to wall.Very happy with the way the doors glide...super smooth. Great price. I can't imagine more expensive hardware meeting our needs any better. By using recycled doors, we spent very little money on the entire project.By the way, most of this work was completed by the wife, with necessary support provided by the husband at just the right time. Thanks, dear! This was our first attempt at a barn door.And thanks, DIY Barn Door. Product shipped as promised; all parts included; no problems at all; would purchase again.Side note: We will be making our own door guide for the bottom of the door since we were unable to hang our make-shift doors the prescribed distance from the floor. No worries; it will be just fine, and not even that necessary.

This is a smooth rolling, heavy duty barn door rail. I am very pleased but I did need to modify the center bumper pads. Because the rail is bolted at the center of the door opening, the spacer and bolt do not accommodate the two bumper pads to enable the double doors to meet together without a gap. I did what a previous person suggested and cut both spacers. That still did not bring my two doors together without a slight space. I used a grinder to route out the metal in order to accommodate both the round spacer and the front bolt. Although it left me with only 1 tightening screw, it was enough to tighten the bumper pads as well as bring my doors together at the center without leaving a gap. I would definitely buy this again but it would be nice if the company could create a modified center bumper for double doors that need to meet at the center.

This item met our needs exactly. A very sturdy door rail at a reasonable price. We have used it for two 24 inch doors to enclose our laundry room. We didn't have to cut it. It comes exactly as described.