Question 1

What are your experiences with consistency between each charge with this measure?

Accepted Answer

Opinion, it is good enough for staying within the published load if you target the center, but if you want tenth of a grain precision at rifle weights, or want to max out the load, you will need additional trickler. 
Some real data, using VIHTAVUORI - N133, sample count=10 at each volume setting (reloading some .223, getting my reliability data and picking a volume for target weight)
at 1.00 CC  average was 12.95 grains, min weight was 12.8. max was 13.0
at 1.50 CC average was 19.54 grains, min weight was 19.4. max was 19.8
at 2.00 CC average was 26.14 grains, min weight was 25.9, max was  26.3
at 3.00 CC average was 39.09 grains, min weight was , 38.7 max was 39.4
On the worst case, 3 standard deviations was 2.6%, the rest 1.5%. 3 standard deviations about 99.7% of your production falls within this range.  So if your in the middle of the specified range... more example say the spec is 22.1 to 24.5 grains, you go with 23.3 as your target and use the 2.6%, 99.7% of your production would fall between 22.7 and 23.9 grains.  This is well within tolerances.  However if you are trying to make high precision ammo 2.6% of target as 3 standard deviations is unsuitable and you should invest in a powder trickler to precisely top off a volumetric measure using this tool.  If this is too mathematical, find an engineer or a math geek and show it to them.  They will tell you I made unproven assumptions, but in general I am correct. 99.7% is assuming bell curve and perhaps I should have gotten more data at each setting.  Data will vary with the specific powder used and the person using the tool, but this is probably typical results.  Keep the powder reserve full.  Be consistent with your motion and careful with your pan.  
Oh, plotting all the points on a graph of volume to mass made a pretty good best fit  straight line, so it is fairly consistent.

Question 2

Will this measure dump directly into a piece of brass without spillage or will I have to dump the powder into a tray & then dump that into the brass?

Accepted Answer

you can do ether way. i have dispense directly into 223 brass, no problem

Question 3

Does this come with a stand? Or do I have to buy the stand separately??

Accepted Answer

Comes with the little stand that’s pictured.

Question 4

ENVIA PARA O BRASIL? CEP 22720410 / SHIP TO BRAZIL? ZIP COD 22720410

Accepted Answer

Sorry we don't.

ASIN	B000NTMJLG
ASIN	B000NTMJLG
Amazon 売れ筋ランキング	DIY・工具・ガーデン - 1,001,896位 ( DIY・工具・ガーデンの売れ筋ランキングを見る ) メジャー・巻尺 (DIY・工具・ガーデン) - 3,242位
Amazon.co.jp での取り扱い開始日	2013/9/15
GTIN (Global Trade Identification Number)	00734307900588
UPC	734307900588
おすすめ度	4.5 5つ星のうち4.5 (2,132) var
お客様の年齢層	大人
アパレル生地の重量クラス	重量（336-403 GSM）
カスタマーレビュー	4.5 5つ星のうち4.5 (2,132) var dpAcrHasRegisteredArcLinkClickAction; P.when('A', 'ready').execute(function(A) { if (dpAcrHasRegisteredArcLinkClickAction !== true) { dpAcrHasRegisteredArcLinkClickAction = true; A.declarative( 'acrLink-click-metrics', 'click', { "allowLinkDefault": true }, function (event) { if (window.ue) { ue.count("acrLinkClickCount", (ue.count("acrLinkClickCount") \|\| 0) + 1); } } ); …
カラー	れっど
コーティングの耐候性があります	いいえ
コートシルエットタイプ	アノラック
パターン	無地
フィットタイプ	レギュラー
ブランド名	Lee Precision
メーカー	Sportsman Supply Inc.
メーカーにより製造中止になりました	いいえ
メーカー名	Sportsman Supply Inc.
メーカー型番	90058
品目の長さの説明	スタンダード丈
商品の重量	0.01 オンス
商品スタイル	ジャケット
商品モデル番号	90058
型番	90058
留め具の種類	Snap
素材	Aluminum
袖のタイプ	ノースリーブ
袖丈の説明	長袖
製品サイズ	20.32 x 23.81 x 7.62 cm; 0.28 g

Lee Precision 90058 PerfectパウダーMeasurer (レッド)

Description

Specifications

Common Questions