Mr.サーフェイサー 1200 (ビンタイプ) SF286

エアブラシで使ってます 使いやすい塗料です

特に これと言ったのは 無いです ステサフと ダーク色系の 下地に使ってます。

来れないと話になりませぬ

下地塗りに使ったが完全に乾ききっていなかったせいか色の乗りが悪く感じた。近くもう１度完全に乾燥させてから試してみたいと思います。

これまで缶スプレーの物を使っていましたが、缶スプレーは噴射が強くて厚塗りになってしまいました。本品をエアブラシで吹き付けると薄塗りができて良いです。

当然エアブラシでの使用しますので希釈をしないと行けないのですが、チョイ濃いめですので薄める事をおススメ。 ノズル0.5ぐらいでエア弱めで吹き付けると、デティールが著しく潰れること無く下地が完成します。でも、この辺は使用する人のエアブラシスペックと、技量によるかと思いますよ。あと筆塗りにしてはシャバシャバです。

今まで缶スプレーを使用していましたが、今回初めてビンを使用してみました。ピーコンを使用してみたときに気が付いたのですが、濃すぎたのでピーコンが吹けませんでした。やはり希釈が必要でした。他のブログをいろいろ探した結果、2～2.5倍との記述がありましたので、早速試したら正解でした。5回ほど吹き付けましたが、大変奇麗に仕上がりました。

スプレーのサーフェイサーで塗れないところ用に筆で塗るため購入しました。すぐ届きましたので早速使おうと思います。

I've recently got back into building plastic model Hasegawa 747s over the past couple months. Primer is an important thing to use so that it'll reveal the assembled model flaws prior to painting. The Mr. Surfacer 1200, again not sure if that means 1200 grit sandpaper feel, maybe it does, maybe it does not, is an excellent primary primer application when you start your painting process for your assembled plastic model kit, whatever it may be. To use it, you have to and i mean HAVE TO, its MANDATORY, to stir the straight out of the bottle, Mr. Surfacer 1200, first! Next you will need to dilute the Mr. Surfacer 1200 with a Mr. Leveling Thinner, NO EXCEPTIONS. To do so, put 1:1 or 50/50 mix of Mr. Leveling Thinner with Mr. Surfacer 1200 into a separate container, stir it well and pour into your airbrush. Set the PSI to about 20 and prime away! The drying time depends on factors such as humidity and temperature, usually a ball park figure of about 20-30 minutes in between coats is ideal. It dries into a smooth finish to start examining your assembled model kit flaws. However, you could stop at the Mr. Surfacer 1200 and then paint your base coat color or could prime again with Mr. Surfacer 1500. Mr. Surfacer 1500 is a more finer finish which will give a really smooth foundation for your pigments. I highly recommend Mr. Surfacer for all your airbrush primer needs! A MUST-HAVE for hobby enthusiasts!

Great to do business with. Product arrived just as wanted.

Complete as Described. bottle is still fresh. packed well and safe.

AS expected

My Weapon of choice: GSI Creos Mr. Procon Boy PS-289 0.3. Review: As the title states this is perfect for scratches you'd normally see on normal wear and tear on CD's and DVD's. I haven't used any other surface but logically I'd recommend the 1200 for plastic models. One size up to say 1500 (keep in mind the higher the number = less gritty) wouldn't do much. I'm pretty sure if you had a scratch you deemed for 1500; that the normal paint technique of Primer, Base Coat, Color Coat, and Top Coat would have filled it in without the 1500. The only reason I can foresee me having a need for surfacer under 1200 would be if I started to carve out a panel line and accidentally slipped off the guide tape and made a scratch a little deeper than a scuff. However, more often than not, I've been able to buff that kind a scratch out at least to a point where I know that the 1200 would fill it in. Love this stuff and it's color. This stuff is of course gritty compared to regular paints. This stuff will need to be thinned only a little. I recommend using Mr. Color Leveling Thinner.