Meguiar's Professional C2000 プロフェッショナル ディテーリング クレイマイルド 7オンス

I have used clay in the past and decided to give Meguiar's C-2000 a shot this time around based on the positive reviews I read. I am happy I did! The results are spectacular. If this is your first time make sure you do some research and understand the process. This is what I did... washed the car thoroughly with Dawn dish washing liquid (this step should rarely be done and only if you want to strip off the wax), Based on the recommendations I read here I decided to use Meguiar's Final Inspection as the lubricant although in the past I've used water in a spray bottle. The clay-bar itself is quite small but it's more than enough for three cars. I only used a third of it and could have properly used it on another car if I wanted. I recommend using surgical gloves if you can for grip (this way the clay never slides out of your hand) and remember to work the clay into a flat surface. Keep it simple and work in small areas, I recommend no more than two square feet at time. Spray both the car surface and the clay, without pressing down hard just glide the clay and trust me you'll be amazed at what it picks up! Inspect the clay often and take the time pick out any large stuff it pulled out - clean it best you can. Before moving on to a new section of your car stop and work the clay into a clean section. This is the most important step, so ensure you take your time. Use quality cloths (same as you would for removing wax) to remove the lubricant your using. I used Meguari's Microfiber and they work really well. If you drop the clay throw it away and use a new piece. I did my entire car (infiniti FX37) twice in about two hours and this was taking my time. At this point some people wash the car again to remove the lubricant spray. I did not think this step was necessary so I waxed the car immediately. The end result was impressive so say the least compared to my previous experiences with other clay bars. If you do your homework and take your time you'll be amazed at the results you'll get with this product.

This clay ain't no roll of the dice! It works, plain and simple. Make sure you have a decent clay lube to go with it.

Brilliant

I like this much better than the diy kit with the white clay that they sell at the auto parts store. This is much tackier and takes less effort/ time to remove the contaminates. For a clay lube I use Wolfgang's Uber Rinceless Wash 4ml per 16oz distilled water. It's cheap to mix up I so use a lot.

I was disbelieving the first time I heard about detailing clay. However, I have now used for several years and give our cars a quick once over every few months. It is amazing how much dirt /grime you pick up the first time.