MOSTPLUS Quad Fold Soft Truck Bed Tonneau Cover On Top Compatible for 2015-2024 2025 Ford F150 F-150 Bed Fourth Fold Styleside 5.5 FT Bed Cover

I installed this on my 2024 F150 Lightning. Installation is pretty easy, instructions aren't that good but once you get it out of the box and look at it, it became evident pretty quickly what needed to happen. The tie downs are pretty fiddly but once you get the hang of opening and closing it, it's pretty fast.Overall, this is a good cover for the money. It makes a little noise going down the freeway, but it's not too bad, none of my passengers ever complained about it. I dont think you're going to get something that makes zero noise unless you get one of the hard covers and they are expensive. This cover cost a fraction of what many of the hard covers cost.This cover seems to do a good job of keeping water out of the bed, it has rained a few times since we got it and I didn't see any water in the bed when I opened it. Makes the truck bed a lot more useful as well, we were able to take all the beach gear in the garage to the coast. It won't stop serious thieves but will deter crimes of opportunity.I'm being this cover will last 3-4 years, which will be enough to get me to the end of my lease on the truck.I recommend this if you are looking for an affordable tonneau cover. I'm happy with it.

Exactly what I order, easy assemble. Great quality.

My old tonneau cover finally gave out. It leaked like a sieve so I needed a new one to replace it. Wasn't looking to spend a lot so I found an open box on this one for pretty cheap. Does the job so far. Wasn't sure about this 4 fold variety since my older one was a 3 fold. So far, it seems to be working all right. Haven't had a chance to see how waterproof/resistant this is so I'm hoping it won't flood my truck bed with water whenever it rains.

I purchased this cover to use as a custom installation for our 5' x 8' utility trailer, and the price on this one was great for this application. In building new sides for our trailer, I found this to be a good choice, as the header (piece containing the rolled-up cover) fit nicely across the 5' front panel (just about an inch of overhang on each side), and the velcro rails each fit down an 8' side. Because this is an unconventional installation, I drilled holes in each of the rails and the header and used wood screws to mount each piece to the wooden frame of each side. When lined up properly, the tabs on each side of the header fit nicely into the designed slots at the front of each rail, which then can be tightened into place with the included hex wrench. The cover rolls nicely down the length of the trailer and back up again. I had to slightly modify the trailer sides to properly catch the crossbars so the cover's weight could be correctly supported, but this should not be necessary in a conventional truck bed. The only modification I had to make to the cover itself was to each of the two velcro side rails - I actually had to cut off about 0.5" to 0.75" of the end of each rail in order for the cover to properly latch closed at the back. This was even after properly adjusting the catches on each of the rails to the correct position - the ends of the rails just stuck into the back of the cover a little bit and did not allow for proper closing and latching at the back. I'm not sure if this would be a potential issue on a truck bed install, but no matter how many times I tried adjusting this and that, the only solution was to remove those ends. Other than that, great value for the cost! And I'm super happy with this cover and how this project turned out! It certainly beats trying to bungee a tarp over the trailer. I did have to add a small shelf at the front of the trailer to hold the rolled-up open cover, as normally this would sit against the back windows of a truck. I would definitely recommend this brand of tonneau cover!

I am rating this five stars, because it is the cheapest tunneau cover I could find for my 2014 f150. It seems really durable, and just as good as more high end tunneau covers. The cover was rather easy to install to the truck. Although adjusting the tunneau cover to be on the truck straight took a little while, but wasn't too hard. It even comes with a little cheap led button light for your bed which I thought was a nice add on.

Okay, I have had this product for two months and so far, it is great. Zero water has gotten in and the truck has been parked in and driven through several rainstorms. The construction and materials seem very strong. I'm 325 pounds and walked on top of it and sat on it. The lights in the cover are bright but not sure how effective they would be.Install was easy. Not sure how anyone could have a problem with it. There is a front/back and you lay it out making sure it is equal on both sides/ends. The only problem I had was one corner got ruined by my tailgate. However, I simply readjusted the cover and it is fine now and no water got in even with the bad corner. Westher stripes are thick and appear to be of lasting quality.If your tailgate can lock than the cover is also locked as the handles are within the bed. And that is really the only con. If you just want to open the last panel you can't unless you leave the inside handles unsecure (which I have done) or open your tailgate. Minor issue but it is a conveyance aspect.

Fitted on 2015 f150. Came with foam I used it to fill gap in front and down the sides just a little. Fits extremely nice and works REALLY good. So far, water tight! There has to be a compromise somewhere for this price, and there is say the cover is just a tad thin. But I have no reason to believe it won't last for at least a few years. I can't believe it was less than $170 compared to some that can go over $1000 and at the end of the day, do the same thing.

The bars for the cover to line up with are crooked, the directions are for the wrong cover entirely. Clamps are made of poor aluminum.