DongarDashcam Power Adapter (10-pin Type B). Compatible with Select Toyota, Lexus, Subaru Models. Connects to Rearview Mirror, Built-in USB Power Source, Easy to Install

This is an awesome product, making for a really clean install of a dash cam in our 2012 GX460. Wish I’d known about these when I installed my dash cam in our Land Cruiser (I snaked the cable through the a pillar and dash). Plugs into the power source for your mirror, without robbing any power/function from them. Really nice. Kinda pricey for what it is, but I’m so happy with this solution that I’d pay for it again.

So simple. I installed mine in my 2024 4Runner. I undid the upper console and pushed my wires down to the mirror and plug from that end. I dry fit my camera and wanted to test my connection for power. I was scared when the so far didn’t power up. But. I reconnected the overhead console plug, and it must have completed the circuit. So we had power. I buttoned it all up and taped my USB next to the mirror cover and mounted the Garmin mini 3 behind the mirror. You can’t even see the camera and if you aren’t looking for it, you don’t even notice the so far at all. Super happy with the install and that it is so dang clean.

Works great easy to install professional look I

This adapter worked perfectly for my Toyota. Makes for such a clean camera install. Easy to install thanks to a YouTube video.

I purchased this adapter to supply power to my Red Tiger dash cam on my 2024 Rav 4 XLE. It taps into the 12 volt DC supply on the video rear view mirror. It includes an adapter that reduces the voltage to 5 volts whuch is connected to a female USB-A connector. This adapter eliminates the need to cut or splice any of thre OEM wiring, and allows for easy removal later if necessary. The adapter is small, but care must be taken to tuck it into the available space so that the wiring cover will fit properly.

I got this to connect my VIOFO A119 mini to my 22 Outback wilderness and it was perfect.The product feels well made. The wires are shrink wrapped well and the connectors are all securely attached. There’s an adhesive pad on the side of the USB port that sticks well to prevent that module from dangling. This also came with three cables, I ended up using the USB Type A to Type C for my dash cam. The cables that came with my cam were either too long or too short.Install was a breeze:1) remove the plastic trim piece between the overhead console and the auto-dimming rear view mirror.2) unplug the rear view mirror3) plug the Dongar dongle into the mirror and then plug the original pigtail into the Dongar dongle.4) push the excess length of the original pigtail into the hole leading to the overhead console.5)replace the trim piece, routing your USB plug accordingly6) stick the USB plug where you’d like with the included adhesive pad7) plug in the dash camThe Dongar setup took me less than 5 minutes. It required zero tools and I did not need to remove any consoles or panels. The plastic trim between the mirror and console can be removed easily with your fingers.Note: this will only power your cam while your car is on. If you want parking mode then this isn’t the option for you.

I recently installed the Dongar Dashcam Power Adapter (10-pin Type B) in my 2022 Tundra Platinum, and I'm quite impressed with its performance. Not only does it fit perfectly, but it also provides power to both my dash cam and radar detector, offering added convenience. The installation process was a breeze, and I appreciated that they included different wires to accommodate various dash cams. Overall, it's been a seamless experience, and I'm pleased with the product.

works on 2024 prius prime. easy to install. somewhat tricky to get the trim back on. was able to use a 1 ft wire to connect to dashcam but it would have been a little easier with a 1.5ft wire. the wires provided were too short to use so i got my own.