ALL10680 Radiator Fin Comb Kit, Black

Exactly as described.

Decent product.

Does The Job

It works well and has many head attachments, but feels a little flimsy

Worked great, the A/C on our horse trailer was in rough shape this little tool had the right size and powered thru some heavy damage and never broke a tooth. Handy little tool but lacks a case

Worked well, kinda tough to get out the really tough damage, it took a little bit of a beating and I had to rip one of the pins off the kit to keep it going

I purchased this fin straightener and the Robinair 18403 Fin Straightener to straighten the fins on my 20 year old RV air conditioner unit. Roughly 30% of all of the fins were bent to some degree due to hail storms over the years. My finned condenser measures approximately 12" x 24".First of all, this is not a miracle tool. It takes time and effort to complete the job. Second of all, it will not straighten out badly bent over fins. Finally, these combs are a one time use tool because they wear out so quickly.If you order the Allstar ALL10680 Radiator Fin Comb Kit, use it only on the edges when necessary because it wears out quite quickly. I recommend buying the Robinair 18403 Fin Straightener to augment this tool. The Robinair 18403 Fin Straightener is a far more robust tool but it will not reach the edges of the finned unit because of the supports on the edges of the finned condenser.After spending roughly 2 hours on the roof of my RV I estimate that I was able to straighten 75% of the bent fins. The remaining 25% that were bent couldn't be straightened because they were too badly bent over.Both tools were completely worn out by the time I finished.My AC now works significantly better. Between the two tools I spent about $26.00 - far less than the radiator shop would have charged.I would not recommend a metal comb. It might be so aggressive that it would cause unintended damage or (worse yet) puncture the tubing.

Works just fine. Takes time but thats not the tools fault.