PUREPLUS 2-Stage Whole House Water Filtration System, 10"x4.5" Universal Home Filtration, with Sediment, Carbon Block Filter, Reduce Chlorine, Taste, Odor, Includes Pressure Gauges, 1" Inlet/Outlet

Easy to install

Arrived with a Broken nipple in the middle. After installing, it of course "leaked" out of the broken piece. Had to completely uninstall and take it apart, to find and then replace the broken 1" nipple.The broken piece was completely sheared! It was factory- installed in the middle of the filter housings and bracket, so the damage was nothing we could have done, it had to arrive this way.

I bought this to remove the chlorine and rotten egg smell from my tap water. I had it installed by a plumber. No problems, no leaks and the smell is gone. The water is still hard but I do get better suds with soap and the taste and clarity is great.

Bought to add a 'pre filter' to my whole-house water softener.Quality of materials seemed adequate, but lackadaisical quality assurance ("QA") caused me much extra work and expense: The 1" inlet on the Right side of the unit was adequate, but on the Left side of the unit was entirely inadequate/bad. Why? In the USA, NPT (National Pipe Thread) is 'tapered'. The threads are a bit larger at the opening, slowly getting narrower the deeper you screw in the fitting. The Left hand inlet was, indeed, standard 1" x 11-1/2 tpi - but it was NOT tapered. I could not screw in the male 1" fitting more than a quarter turn (1/4 turn). No good, would pop out if slightly disturbed.By the time I discovered this, and since everything else was acceptable, I decided to purchase a cheap NPT Tap, which I had to modify so as not to cut into the unit's plastic body, and futz around for an hour until I got a satisfactory 'taper' to accept my fitting. (BTW I tried 3 different 1" male fittings in this bad inlet, including a PVC fitting - None would fit. It was this filter unit's problem until I re-tapped the inlet).So at least it works now. No leaks. Just a bad day at the factory final quality check- or worn-out tap tool at the factory is my guess.It happens. I'm not returning it, but If I wasn't a strong DIY sort of person, I would have sent it back.

Great productt

This was fairly easy to install and is working well to eliminate rust and particulates from my water.

The media could not be loaded. Bought twice.. leaked twice. Used both tape and pipe dope with the install.. STILL LEAKED. This unit is prone to leaks not sure what’s going on with the inlet and outlet threads but I would NOT recommend buying this product.. I will be going with a different water filtration system after dealing with the frustration of assembling and disassembling for it to STILL LEAK. Not to mention the additional parts that were needed for install/re-install. Very irritated with this product..

Just what I needed thanks 👍