BATIOPV TCT Circular Saw Blade 190 x 20mm x 48 Teeth – Multi-Purpose Mitre Saw Blade for Professional Steel, Aluminum, Wood, and Metal Cutting – Compatible with Makita, Dewalt, Bosch

Worked perfect for what I needed it for 🤩

Very sharp saw blade value for money

Cuts through steel very quickly - when you get it installed the correct way around!I am using this with an Evolution compound mitre saw. The blade supplied with the saw has the print facing out when installed, but I was cought out by this BATIOPV blade having the print on the 'wrong side'.There are arrows around the centre mounting hole which I took to be the direction arrows for tightening the fixing bolt due to them being literally right next to the fixing hole. Nope. It turns out these are the direction of rotation arrows which mean that this blade has to be installed, at least on my saw, with the print facing in so as to be invisible when in use.Once I got this right the blade cut through some steel fixing brackets very easily - albeit with a lot of sparks (you're gonna need your safety goggles!).Made a tough job quick and easy, but it would have been good if those arrows had some label to indicate what they referred to!

A meaty blade for those heavy duty jobs and compatible with most mitre saws and saws in general with its 20mm bore hole. I found it really easy to cut wood and some softer metals such as aluminium. The cuts are clean and don't leave much of a rough edge. For the price its good and quality in general is pretty well made.

This saw blade was fully compatible with my partner's circular saw.It came in a decent box which is suitable for storage and to keep the blade protected until you need it.It was easy to install and has given a good finish , so far we've only used it for wood and lightweight aluminium but it seems tough enough to do a bigger job.Overall quite impressed with this compared with other similarly priced brands.

A high quality blade, lots of meat on the teeth and wide compatibility being a 20mm bore.In use i found it to be excellent, metal cutting was clean and the blade didn't have any chatter / vibration. I stated to slow down in the review headline because the max rpm of the blade is 1300. A typical mitre saw or little circular saw runs around 5000rpm! That is fine if using this to cut wood*, but not metal.*Why would you though!I've seen several reviews saying this doesn't have expansion slots. It very clearly does. The expansion slots are easily visible on the blade and they are filled with a compound. I did once read up on the reasoning for using that technique, but it escape me now although i'm sure it was performance related. If you have your doubts, all my pricey Makita track saw blades have the exact same filled in expansion slots.This is a high quality blade and for the right application fantastic.

Comes extremely well packaged in tough cardboard with a gasket surrounded the blade to protect the teeth say within a plastic sleeve. Pretty much guaranteed to arrive in perfect condition. I've used this on my old circular saw which normally takes 180 cm blades but this both fitted and functioned fine as the central hole is a generic fitting. Considering its much cheaper than anything available locally I'm pleasantly surprised at its performance. Used it to cut hardwood and as a test some old aluminium tent poles. Really had no issue whatsoever dealing with the tent pole, akin to slicing through wood. Hardwood which I primarily sourced it for it gave a clean, burr free cut. No evidence to any damage to the teeth after this testing which wasn't surprising as it feels really well constructed. Excellent blade at a bargain price.

Obviously being new this saw blade went through some test cuts like the wood was hardly even there.As you would expect.The teeth on this blade are actually quite chunky so I expect to get a good life span from this blade.Compared to my much more expensive Triton and CMT (which are three times the price for this size) then this blade is OK.Recommended!