Heavy Duty Garage Racking 3 Bay MEGA DEAL 275KG Per Shelf (1800mm H x 900mm W x 600mm D)

Easy to erect even for an 80 year old man who is below average for DIY

Very happy with my garage shelving very sturdy easy to assemble good quality. Would highly recommend .good value for money my garage looks so organised now

Good product, decent size and quality. Ply shelving is thin but ok, and the brackets are good and fit together well.Easy to assemble, and looks good. Good value for money.

Had some difficulty setting up the first one. Thought the pins didn’t align. However, by the third one I realized I hadn’t gotten my “technique” down correctly. Once you understand the best way to get the parts to fit, especially connecting upper tier to the lower one, it’s easy.Good value for money, very sturdy and was delivered earlier than stated, which was a pleasant surprise. Would recommend.If you buy just remember, if you have issues installing it’s probably NOT the shelves. Gently glide in the pins before using the mallet and you should be golden.

I thought they would be bigger, why I don't know given they state measurements, but as I bought 3 lots have put them next to each other so all good. Makes the garage now look very neat and tidy, would happily buy from seller again as delivery on time, and item as described, so any issue is my fault!

My husband works in an office and when it comes to practical stuff he doesn't have a clue!!Within 10 mins we were storming through the assembly.So easy to assemble and very solid.If he can do it then so can you !!

Bit of a pain to put together but got there eventually. Some bits for other easily but others needed a fair bit of force. They are ok for home use and some general storage. Description says 150kg per shelf but no way I would put that amount on them.

Cheap stuff, cheap quality. Good for home. To store light items on shelves. When installing be careful do not bend parts, fragile. Anyway happy, as as I could organize all my garage mess. Thank you !

Si vous avez des compétences en bricolage, ces étagères sont faciles à construire et si vous suivez les instructions, cette tâche peut être effectuée par une seule personne sans aucune difficulté. Pour ceux qui n'ont pas de compétences en bricolage, vous avez besoin d'une paire de pinces et d'un marteau avec quelque chose de doux attaché autour de la tête (ou un maillet en caoutchouc de taille). Le mini-maillet fourni est presque inutile, mais vous avez besoin de la pince pour redresser certaines des languettes afin qu'elles s'adaptent correctement. Pour construire les étagères, vous avez besoin d'un plancher plat qui soit proche de l'emplacement des étagères car votre construction s'effondrera si vous essayez de soulever la baie complète et de la transporter jusqu'à son emplacement permanent. Cela est dû à la méthode de construction des pattes qui est conçue pour supporter le poids vers le bas, et non vers le haut. Les baies finies sont robustes et élégantes et, bien que le matériau du panneau d'étagère ne soit pas particulièrement résistant, il est suffisamment renforcé pour que je sois convaincu qu'il ne se déformera pas beaucoup avec le temps. Il y a 8 «pieds» en plastique inclus avec chaque baie, mais il est difficile de les installer sur le dessus des 4 supports verticaux et de les insérer dans l'étagère supérieure. La baie, y compris le maillet (l'une des 3 boîtes), était pleine de poussière de bois, donc le premier travail était de tout nettoyer. Sinon, je suis très satisfait de cette étagère à 3 baies et je pense qu'elle est rentable.If you have any DIY skills, these shelves are easy to construct and if you follow the instructions, this task can be done by one person without any difficulty. For those with no DIY skills, you need a pair of pliers and a hammer with something soft tied around the business end (or a sizeable rubber mallet). The mini-mallet supplied is almost useless but you need the pliers to straighten some of the tabs so they will fit properly. To construct the shelves, you need a flat floor which is close to the siting of the shelving because your construction will fall apart if you try to lift the complete bay and carry it to its permanent location. This is due to the tab method of construction which is designed to bear weight in a downward direction, not an upwards lift. The finished bays are robust and smart looking and while the shelf board material is not particularly strong, it is sufficiently reinforced so I have confidence it will not distort much with time. There are 8 plastic “feet” included with each bay but it’s a struggle to fit them to the top of the 4 vertical supports and also squeeze in the top shelf. The bay including the mallet (one of the 3 boxes) came full of wood dust so the first job was to clean everything. Otherwise I am very pleased with this 3-bay shelving unit and think it is cost-effective.

Es buena, solida y consistente. Aguanta bien el peso y el aspecto es robusto.El montaje es sencillo y las piezas encajan bien.Yo he comprado tres y van bien cargados todos los estantes. Aguanta perfectamente.Aconsejo anclarla a la pared. Si tienes objetos pesados y arrastras para sacarlos, la estantería se mueve.La relación calidad-precio es muy buena. Totalmente recomendable.

Ok

Perfecta para el garaje o taller de tu casa. Y se monta rapidisimo.

Leicht zu montieren. Richen am Anfang etwas, verfliegt aber. Ansonsten echt super.