High Performance RED Polyurethane Cylinder Seals for the Weihrauch HW100 & HW101 Part no. OR044 / 2665 This is the seal that goes on the brass nipple on the block where the cylinder screws in. Typically the most common seal to fail/shred in these rifles resulting in leaking. These are up-graded, high performance seals made from red polyurethane and will last much longer than the original spec. seals. Polyurethane (90 Durometer / PUR90) is a far superior material to the regular black nitrile o-rings sold in the UK. Usually very expensive seals, but we buy them in bulk so that we can pass the saving on to our customers. RED - so that you know that these are the high performance seals for the cylinder and cannot be confused with any of the other seals you may have for your HW100/HW101 Also includes a small amount of Molykote III lubricant in the packet for you. (Molykote III is a high specification lubricant that improves longevity of the o-ring. Apply a thin layer to the o-ring prior to fitting for best results). Easy to fit - just unscrew the cylinder from the HW100/101 then remove the existing oring and replace. Before screwing the cylinder back on, add a thin layer of molykote to the oring. (TIP: a cocktail stick is great for this!)
Trustpilot
2 months ago
3 weeks ago
