BASENOR 4PCS 2024 2025 Tesla Model 3 Wheel Covers Hubcap 18 Inch Aero Wheel Cover ABS Replacement Hub Caps Rims Cover Model 3 Exterior Accessories Highland (Matte White)

Great product and look really good on my model 3 Dual Motor with Acceleration Boost. But day two and I really kerb damaged one of the trims (Saved the wheel rim!!!!) and there appears no way to buy a single Basenor trim replacement. So very disappointed. Come on Basenor / Amazon. We Tesla drivers are not perfect but like to keep our car in tip top condition.

I fitted these to my new model Y in May and they looked great. Fitting instructions were followed diligently to the letter. By October I noticed the car was making some strange noises when going over speed bumps, initially thought it was the undercarriage, but have since narrowed it down to the hub caps. All 4 have become loose after just a few months of use. On removing them I found that the central clips had broken on 3 of the 4 hub caps meaning they were rattling around, making the car sound like a bag of spanners being dragged down the road. If you're considering buying these, I would urge you not to.

They look great, feel quality and it's good then they cover up the curb marks from the previous owner. The recent floods took my 2 rear aero caps so needed replacements asap, beats buying new alloyd and can retain the OEM shape but have them protected now. Easy to install.

These covers look great on my 2021 model 3. Few things to clear up the listing as I was a bit hesitant before ordering: 1. The arachnid wheel covers come with 3 sets of centre caps (White T logo, Red T logo, and embossed T logo) 2. They require application of a foam padding material round the rim to prevent scratching to the alloy over time. 3. Require quite a bit of force to install, and would recommend double checking that they are installed properly.

Good product. Well packaged. Easy to fit. However ... Product description and images need updating. Product description says this: What's in the box? Tesla Model 3 Wheel Cover*4 Foam Tape Tesla Center Logo (Black, Red, White)*4 In fact only black embossed stick on centre logos are provided. They look fine, but I'd have liked the choice of fitting the ones with logo picked out in white as I have a white car.

These covers fit the rims really well. They are so good that they look as if they are OEM solid alloy wheels. And they are very secure. They wash great as well. Very happy.

I have received 4 left wheel covers so would not recommend this product. There response was "Hello, there is no direction distinction for wheels" The hub caps are aero in design with each spoke being a blade, the leading edge of the blade should face into the direction of the wheel spinning. With the hub caps thay they have supplied the left hand side leads with the leading edge (sharp edge) but the right hand side leads with the trailing edge (flat edge) this would act as a break and not supply any aero dynamic benefit that they claim this hub cap has. Plus they will look odd continuously running backwards. Hope this helps someone. Please search for directional hub caps if you would like an OEM replacement.

Very easy to prepare and install and such an improvement over the standard Gemini covers. Just stick the adhesive backed foam strip around the outer perimeter, fit the central logo then fit to car. Packaging excellent, double wrapped for protection and individually boxed. Design of these covers fully hides the alloys behind so there’s no silver visible

i was looking to change the wheel hub caps for my 23 Tesla Model Y, and wanted to get something in matte black which are close to performance wheel, the original hub caps that came with the car are efficient but not great on the looks, came across these hub caps which looks seems to look like performance wheels, was little hesitant about the quality of it. but as soon as i opened the box i was blown away by the quality and finish of the product, it is Matte black and came with Zero scratches on it. any scratches on the black hubs are clearly visible, but these came well packed and was well made, it also came with an adhesive soft material which goes on the inner side of the wheel hub caps to avoid any noise from contacting the wheel hubs. it did stick very well , and then it came with 3 different color adhesive center caps with Tesla logo on it with protective cover to avoid any scratches while packing. i used the red ones and they looked great, once all the prep is done, it took only 10 minutes to change the wheel hub caps, they are better quality then the OEM ones. one quick tip while putting them on is to press the center part where the tesla logo is attached first and make sure that went in all the way and then push the area behind the clips, very easy to fix them in and they fit very tight and cover the hub completely better than the OEM ones, it changed the looks of the car completely and right away it looked premium and got few complements from other Tesla owners. Highly satisfied and i think it will definitely last a while. most important thing is noticed no decrease in range of the car after replacing the original hub caps from Tesla, also there is cut out to fill in the air. all 4 wheels hubs are made similar so there is no left or right ones specifically.

Originally wanted to plastic dip my rims black after I curb rashed one of them but found this alternative and I’m glad I did. These wheel covers look great in person and even though they’re plastic, they don’t feel or look cheap at all. They maintain the aesthetic of the OEM rims and add protection. They come individually packaged and bubble wrapped so there’s no scratches. Make sure to add the foam strip to the outer rim of the inside as that will prevent scratches from dirt getting stuck in between the wheel and wheel cover. Installation was super easy, you just snap it in place on top of the OEM wheel. Well worth the price and loving the look. Highly recommmended.

Perfect

I made this harder to install than it should be, took me 15 minutes to figure out align the divots with the air intake don’t judge don’t be me in this case lol, but it was easy to install and seems to have a secure hold on the wheels great purchase

Diese Radkappen waren ein sehr guter Kauf! Erstens sehen sie am Model Y echt schick aus (mein SR/RWD wurde schon mehrfach für ein Performance-Modell gehalten, auch wenn diese "Hochstapelei" gar nicht meine Absicht war). Zweitens sind sie etwas größer als die originalen Radkappen für die 19"-Gemini-Felgen und a) schützen damit die Felgenränder (leichtere Bordsteinkontakte o.ä. sollten nur die Radkappe, aber nicht die Felge beschädigen), und b) wirken die Räder damit etwas größer als sie tatsächlich sind (man soll's ja kaum glauben, aber die 19"-Räder mit Standard-Kappe wirken am Model Y fast schon ein bisschen zierlich). Drittens sind sie von hoher Qualität. Der Kunststoff ist sehr stabil. Die Oberfläche ist halb glänzend, halb matt (irgendwas dazwischen) und wirkt dadurch einfach edel. Viertens sitzen sie auf der Felge bombenfest! Die Mechanik ist zwar dieselbe wie bei den originalen Radkappen, und letztere kann man ja noch händisch mit ordentlich Ziehkraft von der Felge lösen, aber bei diesen hier schafft das höchsten Goliath! Ich empfehle also dringend, wenn nicht schon vorhanden, ein passendes Hebelwerkzeug anzuschaffen (Länge mindestens 20, besser 30 cm, aus sehr glattem Stahl oder noch besser aus sehr stabilem Kunststoff), mit dem man schonend (genau da, wo die Halteklammern sitzen) zwischen Felge und Radkappen gehen und letztere dann abhebeln kann. Anders kriegt man die Dinger schlicht kaum wieder runter (es sei denn, man schraubt das Rad vom Auto ab und kann dann von innen die Halteklammern zusammendrücken). Mitgeliefert werden Schaumstoffbänder, die vor der Montage rundum innen an der Außenkante der Radkappen angeklebt werden und später zusätzlich die Felgenränder schützen (sowie vielleicht auch Windgeräusche reduzieren) sollen. Das ist ein bisschen Arbeit, die man aber abends vorm Fernseher locker nebenbei erledigen kann. Hinzu kommen 3 Sets hochwertiger Nabenabdeckungen zum Kleben in Schwarz, Silber oder Rot. Ich fahre diese Radkappen jetzt seit mehr als 3000 km und bin überaus zufrieden. Einmal haben sie mich schon vor einem Felgenschaden bewahrt, als ich im verschneiten Winter auf einem engen Parkplatz einen Bordstein angerempelt habe. Daher habe ich mir sogar einen zweiten Satz zugelegt, um jederzeit passenden Ersatz zu Hause zu haben. Der erste etwas schlimmere Bordsteinkontakt kommt bestimmt irgendwann, und dann bin ich froh, statt Instandsetzung oder gar Neukauf der teuren Felge nur die relativ günstige Radkappe austauschen zu müssen, und alles sieht wieder wie neu aus. Apropos Preis: Ja, 200 Euro sind viel Geld für Radkappen und sicher kein Schnäppchen, aber angesichts der hohen Qualität und perfekten Passgenauigkeit für die Tesla-Gemini-Felgen angemessen. Zudem gibt es fast immer einen Rabattgutschein (ich habe für beide Sätze jeweils 180 Euro gezahlt). Und wie gesagt, so ein Satz neuer Radkappen ist immer noch billiger als eine neue Felge... Ob diese Radkappen tatsächlich (im Vergleich zu den originalen) 4% Strom einsparen, kann ich nicht sagen. Dafür müsste man Testfahrten unter exakt gleichen Bedingungen unternehmen, und wer macht das schon. Hier kann der Hersteller also etwas behaupten, was man als Verbraucher so schnell nicht widerlegen kann. Aber die potentielle Ersparnis dürfte für die meisten Kunden eh nur eine nette Zugabe sein, die im Zweifelsfall nicht vermisst wird. Von meiner Seite daher eine klare Empfehlung!