Induction Heater Bolt Removal, 1500W Induction Bolt Heater Tool with 8 Coil and Rugged Carrier Case to Safely Remove Nuts, Bolts, Bearings, 2 Warranty 110V

I like the timing light style that this has, much better than the club style that many of them have. Fan runs continuously when hooked up to electricity. I like that too. The first time I used it the nut smoked but didn't glow red, the coil was too much larger in diameter. Coil needs to be almost touching the item to be heated and then it really heats fast (red in a matter of seconds). Don't forget to take off your metal personal adornments.

Wow, does this thing work‼️Used to heat up a couple of brake bleeder valves, both rusted in, not kidding when I say the bleeder valve was glowing orange in less than 5 seconds - wow‼️Both valves broke free and came right out after that.

I bought this rather expensive product to help with restoring my VERY RUSTY truck. I am very pleased with the performance and capability of how it can convert the rust into dust and release the stuck bolts from my rusty truck frame. These bolts had been in the wet for 23 years on salty roads, so there are no worse conditions to challenge this equipment. Some of the bolts were snapped off in the hole with two layers of 1/8" steel plate with a nut welded inside the second layer and that nut was rusted on to the snapped off bolt! Add to that a tight and limited access due to being inside the rear leaf spring arch, and near the gas tank, so this tool is a MUST HAVE for anyone trying not to blow themselves up with an open flame near the gas tank or burn some vital wiring or plastic parts. The tool will turn any exposed bolts red hot in about 30 seconds which softens the rust like magic. You may still need to weld a nut on the exposed end of the snapped off bolt to get a grip on what's available, and for that, I would recommend a MIG welder with some .035" wire to get a good bite for the nut to twist the stub out of the hole. The kit is furnished with two extra-long wire electrodes that can be bent into any needed shape for best access, and I have used them both! I would not have a chance of making any progress on this rusty truck without this induction heater at 1500 watts- packs quite a punch! Nice padded carrying case and very simple to use! Just DO IT!

Able to reach starter bolt and apply heat to undue nut. Not sure if really produces 1500 watts because no amps listed on machine. Limited instructions. Cord appers of cheap plastic. Threads required to thread bolt back and forth to clear burrs out.

I’m not sure why I haven’t ordered one of these sooner. It works absolutely great

I live in ND every bolt is siezed and rusted. 1 minute with this and it removes everything!!This actually works extremely well!I should of bought this years ago.

Works great. Heated the bolts until it glowed in about a minute and safer than a torch.

Works fast! Red hot nuts and bolts in a minute or so. Makes the frozen nuts come off fast. Make sure you let the nut cool off for easy removal.