Nanoskin AUTOSCRUB Surface Prep Towel Fine Grade- Patented Clay Bar Replacement Tool to Remove Embedded Contaminants Before Wax & Coating | Safe for Painted Surface, Glass, Plastic, Metal & More, 12" x 12"

Excellent product that covers more area and thus does the job faster than a clay bar. Make sure and break these types of towels in on your windshield BEFORE using them on your paint. There is a film/coating on them that needs to be removed before you use them. Break the film by spraying lube on your vehicles OUTSIDE glass surfaces and use the clay towel on the glass. Once you do that to the entire surface area of the towel it is ready to use. I go a step further after breaking it in that way and I rinse the towel under lukewarm water before proceeding to clay the paint. Don't use much pressure on the towel, don't rub hard, use plenty of lube and glide the towel. If you don't do this you run into the possibility of the black rubber/resin coming off of the towel and on to your paint. If that happens gently remove it. I used a little bug and tar remover if that happens. The one downside is the towel isn't so swift in small areas or near emblems where a clay bar is best used. Unlike clay if you drop it you have to throw it away, the towel can be rinsed off in lukewarm water and used again and again.

I work at a car dealership and I asked our ace detailer what he would recommend and I ended up buying this Nanoskin product. He said it's very effective, is easier to use than a clay bar, and if you drop it you just rinse if off versus throwing away a clay bar if you drop it. I agree with him 100%. I've used this several times now (with the Chemical Guys Luber) and found it very effective in removing fallout, paint overspray and road grime. Once I got spattered following a cement truck and by the time I got home the residue was dried on and rock hard. I got out my lube and the Nanoskin and it removed the residue easily. You don't need to be a professional detailer just spray on whatever lube you use and wipe down your vehicle with the Nanoskin using very little pressure just as if you were drying your ride and it removes all the imperfections embedded in the paint. I highly recommend this product.

Amazing product as I used it before but had horrible service through this seller and Amazon.Ordered 7/25 and confirmed shipped to arrived 7/26. Get delay email to arive 7/27 to 7/28, no problem. Then I don't hear anything at all and Its 7/31. I contact support to find the item has been lost in transit.... What a waste of my one week, makes me realize I should support my local store instead os Amazon

If you have never used a clay towel and are still using a clay bar you need to make the switch immediately. I detail cars on the side and this towel has made my life very easy! I love how long these towels last, the effectiveness these provide to the paint and the fact that you can drop it on the floor and still use it! These towels are the best investment for anybody that wants a glass like smoothness to their paint and very simple to use.One thing to note if you are new to these, make sure you use plenty of lubrication. If you don't, you will risk marring the paint. I use Optimum No Rinse to wash my cars and as a lubrication as I use this towel. The results are outstanding. Additionally, apply very light pressure as you use this and never do lowers on your car until you are finished with the rest of the car.

I would recommend this to everyone who uses a traditional clay bar on there car. I've use this all summer and it works better then I anticipated. I was a little skeptical at first and a little hesitant to spend the money however I'm really happy I did buy this product: It's quick enough you can do it after every wash and seems to be holding up great. I normally wash the car, wash off the soap, and then reapply soap using a foam gun then go to town with this clay bar towel. After I use it I wash it off using a stream of water, let it air dry and then it's ready to be used again. Any contaminants seem to come off of the clay on the towel and the towel goes a great job on removing the contaminants from the car's clear coat. For some tougher spots, a traditional clay bar with some clay bar lubricant works wonders, but for 90% of the time this towel is all I need.

I am own and operate a Mobile Detailing business.Iv been in business for 28 years.I have used a large number of different products over the years.I have used the original Clay Magic for decades.I was just given the clay towel to try out.The clay towel is nice to use because of the flexibility.Contrary to its Claims it is not as Thorough as the Clay bar.It dose work well it just seems you need to go over the surface more.The Clay Magic Clay Bar will get the surface smother quicker.But every tool has its place and I will keep this in my Arsenal...

Works great. It’s been about 2 years since I clayed my car. The hood had a coarse feel. Worked well in a fraction of the time. Make sure you break it in on the windshield until you get a slightly tacky feel to the rubber side. The mitt might be a little easier to use. I had to fold mine in half to get any grip on it. Left no marring. I followed with megs 205 polish and the tried and true powerlock/collinite combo. Now the paint is silky smooth making keeping it clean a lot easier.

Wow, had this recommended by a friend. As a guy who likes to baby his car and enjoys hand-washing, It does an amazing job of removing embedded dirt without scratching the finish! Wish I knew of these before!

This may seem expensive, but when you consider the price of clay... This is reusable and is MUCH... MUCH easier to use than clay. It is worth the money and does an excellent job! You won't be disappointed.

Great product. I found it works as well as a clay bar if not better. Super fast detailing and leaves a extremely smooth finish. Would highly recommend this product.

Works great. Broke it in doing the windows on two cars and didn't notice any maring on a black car. Took waterspots right off the windows in a couple of passes.

Does the job of a clay bar in 1/4 of the time.

So much easier than using a claybar on the whole car.