Aclorol USB Led Light Strip COB Led Strip Lights 5V Daylight Cold White 6000K 3.28FT 320Leds Flexible TV Led Lights USB Powered 1M for Under Cabinet Kitchen Living Room Shelving or Displays

Very easy install and super bright. I see a lot of complaints about the lights not adhering to the surface properly. You need to make sure that you prep the surface before installation. Proper surface prep means to clean the intended surface with rubbing alcohol and allowing it to drive before adhering the lights to your surface.

The length of the lights and cord are as advertised - 1 meter each. This was perfect for my project. I was concerned because some buyers said 1 meter was the overall length including the cord. The usb cable length was described as 1m, and that is correct. And the lighted length is also 1 meter. They are very bright and a pleasing warm color. They were actually a little too bright for my space, so I enclosed them in a white translucent plastic sleeve before mounting them, and secured the sleeve to the wall with finishing nails, instead of using the adhesive. I will probably buy more of these for other spaces. Note: at first I plugged them into a 5v usb adapter which had 2 ports, with a string of fairy lights plugged into the other port. This made the lights much dimmer. Once I plugged them into a single port adapter they were fine.

Installation was quick and easy – truly plug and play with no issues at all. The lights function well, but they aren’t quite as bright as I expected. They get the job done, but if you’re looking for very high brightness, you may want to consider other options.

It was a good set of lights. The LEDs were on a strip. The cord could have been longer; it was shorter than what was expected, making it hard for us to use. The tone of the light is very nice and bright enough without being blinding.

Nice and bright. Works great with 3xAA 4.5V battery pack putting out 4.5V. Not sure how long it will last but if necessary I can upgrade to C batteries. Also works with a usb charger plug. No switch so good if you want it to turn on and off via remote or smart plug etc.If you buy these to plug into a TV or other device with usb port - not all ports have enough power to power devices - only to slow charge them or use as a media storage. My TV has 2 usb ports and only 1 is marked as putting out 5V. The other one only puts out half the amount, not enough to power anything.Works great with RF remote I purchased separately to turn on/off, dimming, and also some special effects modes. I think it was like $7 for a 2-pak of them. This strip will also light up submerged in water even though it looks like it has bare copper pads but they are plastic coated. I am using on my RC vehicles including underwater lighting on RC boat. Great for DIY projects. I will probably be needing more of these...

The lights are bright and work well, but the adhesive sucks. The adhesive stuck to the lining for about half of the roll before it came off like it's supposed to and I realized what happened. The adhesive also came off unevenly in little patches. You can see the white adhesive stuck to the blue lining in the pics. Even though a lot of the stickiness is ripped off it is still somewhat sticky so I'm going to see how long it lasts, though I don't expect it to last long. It's not worth returning it. It is NOT 3M though

Great product. Easy to cut and splice to make smaller strips.

I love inexpensive LED strips because they're convenient when you have a small space that doesn't warrant purchasing a $20+ system with dimmer switch and transformer. I used a spare USB 2.0 outlet as well as a USB 2 extension to create a cold white ambient effect for part of the DIY modernization that's in progress for this bathroom. The adhesive works fine, but it tears diagonally around midway so just be cognizant of that.Otherwise: Bright, proper color, works with any generic USB 2.0 outlet, and the continuous light bar look continues throughout the entirety of the illuminated area and you can't see the individual LED spots. That latter concern is not an uncommon phenomenon with inexpensive LED strips. The 3-ft segment was actually a little bit too much for my bathroom ambient light objective, so I actually soldered the scrap piece to another spare USB cable I had somewhere in my house and used (no surprise) a spare USB 2.0 AC outlet - I gave this little table outside in my backyard (in front of the door, to the left of the photo) a cold white ambient glow. So, I was able to add ambient cold white lighting to two things in my house with the purchase of one inexpensive cable!