Rustins STNF250 250ml Strypit

Why did you choose this product over others?:Results on pictures.

I used this on a radiator I wanted to strip down to the bare metal. At first I was using just a small amount on the tricky corner bits that the sander could get to, but eventually I was using it everywhere.The best technique I found was to gloop it all over in a nice thick layer, wait around 30 mins, use a scraper to mix it all in and lift the top couple of coats, another 20 mins later I could use a cloth and bucket of water to remove most of the paint. It's pretty gross cleaning the cloth out though, sort of like dealing with a basin of sick!Any paint left was suitably weakened and easily removed with the sander.

Works really well with a second application

This product was amazing! At first I applied the gel like substance with a sponge but found that a clean paint brush was much better, I was worried I would need a few coats as I was applying it to wall tiles and not a flat surface like a floor. I needn’t have worried as I only had to go over just a little bit behind the sink taps. There is a very low odour, I just had the window open and it was grand. One tip, I would use a smaller scraper than the tile and as your scraping each tile use a cloth or wipe to clean the surface as you can get little bits that once dry need re scraped. This is value for money and does an excellent job. I have never written a review good or bad before but I would be doing a disservice to the supplier and product if I didn’t. As long as you follow the instructions to protect your surroundings and you own self you should have no problems with this. 100% recommended 👍

Didn't remove the paint just made it worse ended up sanding it down would not buy again

I followed the instructions to the letter trying to strip 2 coats of yacht varnish. After the allotted time there was no bubbling, the varnish was very slightly softened but not enough to strip. I ended up using my old heat gun, much better!

I was worried about how this would work after reading other reviews. I had looked at so many diffrent products but I decided to go with this. I'm really glad I did. I have alot of rust under the paint on my 50cc moped so I needed to strip the paint, i applied one coat waited 5 mins, applied again waited an hour and the paint just came right off. There was a few places that needed a second application but i think that was because i was being a bit eager and not waiting long enough. I recommend using a scrapper and a wire brush if using it on metal and wash off after. The smell is abit strong but I was aware of this and used it outside so it didn't bother me at all. I think this is a great product that works so well. If I need to strip paint again I will be 're purchasing this

The best stripper on the market. I used a lot of different brands and only this one is doing the job.Downside is the smell and the price. Too expensive.