3 in 1 Protection Case Set for Flipper Zero & for The Wi-Fi Dev Board V1 ESP32-S2, Accessories Compatible with Flipper Zero & WiFi Dev Board - Clear WiFi Case with Blue Soft Case Set

Glows well, easily seen, good protection

I will tell you off the bet it is not worth the $50 that it costs. The dust covers are a very poor design. The dust covers go inside of the case. The SD card dust cover in particular is impossible to take out without removing the whole case, which is about the stupidest thing I could ever think of. The dust cover for the charge port doesn't connect in any way to the case unless you cut the rubber. The case for the Wi-Fi module is very difficult to take on and put take off. As many others pointed out in the reviews, it is impossible to use both covers at once. However, I do have a suggestion if anybody else bought this case. If you cut the middle of the case where the pinholes are, then you can move them and push in the Wi-Fi module all the way, which is about the only way to make this work without it constantly coming out. It does glow a little bit in the dark, which I suppose is cool, and overall it's better than not having any case on it all, for sure. But I just don't think it's worth the $50. I would say this is like a $10, $15 case at most, not a $50 one.

Okay, so first, when I ordered the case, I put it on; it fits perfectly and comes off perfectly, but then I started encountering many problems—MANY. First of all, dust covers are a very dumb idea, because with them, the case still collects dust inside................ AND IT COLLECTS DUST ON THE OUTSIDE OF THE CASE AND ITS SO UNSATISFYING!!! First, you must remove the case to do anything, like insert the dev board, the SD card, or the charging cable. (ESP)ECIALLY THE DEV BOARD CASE (sorry for the pun; it was dumb); the dev board case is hard to put on. I had to take a knife and yank it off, and apparently, I cut myself................................. AND THE DEV BOARD HOLE ON THE FLIPPER CASE, WHERE IT ALWAYS COMES OFF (putting both cases on simultaneously is nearly impossible). All right, the next problem is the plug hole. You can't charge the poor little drained dolphin without freaking taking off the case!! The next problem is the SD card. The SD card. .................... . WHAT THE HELL YOU HAVE TO TAKE OFF THE CASE TO TAKE OUT THE SD CARD??????????!?!!?!... AND THE DUST PLUG???????????!!!!!!!!!!!!!!!!!!!!! WAT?! ok yeah that's all, sorry for yapping, other than all of this, this case is kinda good

Everything fits perfectly buttt..Closing the case is a little tight with everything but still fits but like most flipper cases, gpio accessories wont fit all the way and with the board case it wont stick all the way in

Comes with items that don’t fit inside the case they come with…yah…figure that genius move out

The media could not be loaded. Every thing fits good and the individual product. THE FZ silicone case is great by itself. And the Wifi Dev board case by itself is great. Just can not use the together. Should have said that. Would have been good to know. Since pictures show them together.

Macht was es soll

Un po' costoso e ingresso per le board che non permette un contatto ottimale

Product quality is fine. KudosYou have to take off the dev-board cover to use the dev-board with the flipper.. would honestly not recommend this item since the case for the devboard are somewhat useless together with the flipper case. I dont believe this has been tested together when made. You can cut out the bottom of the devboard case yourself and fit them, if you choose to buy this.Only buy the flipper case or buy this for safety when "storing" these items.

Guter Schutz im täglichen Gebrauch! Und leuchtet in der Nacht!

Alles gut!