White Acrylic Sheets 12" x 16"x 1/8", 2 Pack 38.7% Translucent White Cast plexiglass Sheets for DIY Display Projects, Signage, Craft, Photo Frame, Painting and Easy to Cut.

I’ve bought similar from a few different manufacturers and these are the best. Only feedback is the sizes of these are not exact. I was cutting this on my laser and it was a very tight design, no wasted space, and the tops were cut off. Ended up wasting about 1/3 of the pieces. Measure each piece before using, but otherwise good quality!

This is THE BEST of three brands I tried for a big project. Took 4 passes with my 5W laser. On my new 20Watt Acmer laser cutter: with one pass at 80% power and 200mm/min. MUST use Air Assist! This brand, the UU&FIL had much smoother edges and almost no lip at all. VERY clean cutting. In the picture, UU&FIL brand on top. I tried with and without the paper on. Cut much better with no lip on the edges if leaving the paper backing on. Removing the paper backing after cutting is a pain, but if you want really nice corners/edges, leave the paper on when laser cutter. I'm staying with this UU&FIL brand!

These pieces of plexiglass arrived safely and carefully packaged. They protective paper coating on both sides. Since I used these for photography, I only removed only one of the paper coatings, so the reverse can remain stratch free. The surface is opaque and gives an excellent reflection/refraction effect. I wanted to elevate the formality of my photos, and these will work well for that. Because this type of photography works best with a clean, smooth surface, I recommend a glasses cleaning cloth to remove stray pieces of dust and fiber.

it is what it is

..but once it was installed on our kitchen backsplash and because of its transparency, we can see through the acrylic where the glue was applied on the wall.

I need this as a spacer under part of my cafe racer seat and it works great. I just used a jig saw with a fine tooth blade to cut it. Easy.

I ordered several of these. They're exactly as described with a protective covering on both sides. Just what I was looking for.

I got these to cover the top of my fish tank. They were the exact size I wanted and they work for what I needed them for. There is a myriad of uses for them but for me this is all i needed them to do and they came through for me.