đź”§ Level Up Your Tiling Game!
The Deuvuo Tile Leveling System is a comprehensive tiling solution featuring 300 pieces, including 200 screws and 100 reusable nuts, designed for tiles ranging from 3-15mm in thickness. This user-friendly system ensures precise alignment and professional results, making it ideal for both DIY enthusiasts and professionals. With a focus on cost-effectiveness and satisfaction, this product guarantees uniform grout lines and perfectly flat surfaces.
Manufacturer | deuvuo |
Part Number | DELMTL-PARENTS |
Product Dimensions | 2 x 2 x 2 cm; 820 g |
Item model number | 3mm-LM |
Size | 3mm Set |
Colour | Blue |
Material | ABS |
Item Package Quantity | 1 |
Included Components | Tile Levelling System 3mm: 200 Screws & 100 Nuts |
Batteries Required? | No |
Item Weight | 820 g |
S**Y
Better job thanks to these
The Deuvuo Revolutionary Tile Levelling System, paired with 100 Tile Leveler Spacers, became my unlikely companions in a tile project that I, as a non-tiler (having never tiled a wall in my life but fancied a go), approached with trepidation.Despite my lack of professional experience, these levelling systems proved to be useful, I did try without them but didn’t have the knack or skill that only training and experience would grant. They maintained tile face alignment seamlessly, even when the wall decided to take an unexpected turn by running out 5mm top to bottom. The ease of use and removal after the fact added an extra layer of convenience.While I encountered five faulty pieces, I found it reasonable given the overall affordability of the product. Notably, the faulty ones aside, these levellers cleaned up well and proved to be reusable, adding value to the investment.The end result of my tile project exceeded my expectations, and I believe it wouldn't have been as impressive without the support of these levelling systems. The free tile spacers included were dismissed, as I opted for a more substantial quality:quantity from Screwfix without breaking the bank.In conclusion, the Deuvuo Revolutionary Tile Levelling System is not a magical ticket to becoming a pro tiler, but when used correctly, it consistently delivers flush tiles and impressive results. It's a handy tool for DIY enthusiasts aiming for professional-looking tile projects without the seasoned experience. 🛠️🧡
M**N
Good
Did the job perfectly fine,Some don’t snap off, but easy enough to cut with a Stanley knive!
C**S
Great product
The 3mm spacer part seemed to be about 1mm too short for my 20mm porcelain tiles, which seemed odd, so I ended up having to have 5mm gaps based on the width of the plastic screw. Actually that suited me just fine as it looked better! Easy to break off with a rubber mallet afterwards. Overall excellent
C**B
You get what you pay for
Please avoid this product. It does not break cleanly and has created extra work by having to remove the plastic between the tiles with a Stanley knife. Just spend a little more and buy the Bihui reusable tile leveller. Works much better and is a breeze to remove.
G**.
5 star
Where was my life before these spacers 🤣 absolutely brilliant
M**E
Bit bendy
Worked bit a bit inferior to other similar products I’ve used bend and move when tightening so gaps form .;(
B**E
Fantastic product
These are amazing for the price you pay. I’m currently doing a large landscaping project where I’m tiling my back garden with some very expensive tiles. I didn’t really trust a tiler doing it as the last job wasn’t done great so took the chance and purchased these. So far I’ve used around 800 of them in the job. There has so far been around 4 that have failed to come out. In all cases, the spacer was really badly covered in the adhesive. To get them out you have to use a grout remover tool to dislodge the adhesive and then pull the plastic thing up. They do break off which says to me that it’s not the product failing but the fact they are literally cemented in. I’d also advise that I wouldn’t leave for the full 24 hours. The 4 failed ones all occurred when also left for the full 24 hours. Overall, I’m happy with the finish. More level than the floor tiles I had professionally laid. I definitely wouldn’t read too much into the reviews calling out the failure ones as it’s most definitely avoidable.
G**Y
There's a knack to removing them
These worked well making levelling tiles easy. Removing and reusing the blue 'nuts' was a pain so buy plenty. I found the best way to shear the tops was to remove the nuts and then wack the visible triangular part of each spacer along it's length with the hook end of a small prybar as close to the tile surface as possible. A bolster or even a pin hammer worked as well. Trying to shear them by wiggling side to side doesn't work and if you hit or kick them with the nut still on the screw thread shears, leaving the triangle sticking out.
Trustpilot
1 month ago
2 weeks ago