Dash Cam Hardwire Kit, Mini USB Hard Wire Kit 11.5ft with Acc, 12-24V to 5V 2A Car Dash Camera Charger Power Cord, Gift 4 Fuse Tap Cable with Battery Drain Protection for 24h Parking Monitor

This kit WORKS! It was a little difficult to find a fuse that turns on and off with the key. (My 2017 Ford powers the accessory plug at all times, key on or not, so was not a viable option for me.) I ended up using the windshield wiper fuse. But once I was able to find a viable fuse, the rest of the installation went very smooth and the dash cam oks perfectly.If you have an imported car, you can probably use the accessory outlet. If you have a Ford, you can probably use this ket, and choose the windshield wiper fuse. It woks like a charm. Well worth the money!

This hardwire kit should work with any camera that uses a Mini-USB (or Micro-USB if you choose that option) connector for power. I am using it with a Whistler group D16VRS "Luxury Dashcam Automotive DVR" and it easily installed in my 2001 Honda Accord LX.I was able to tuck the wire into the headliner along the top of the windshield, then run it behind the left A-Pillar down to the driver side fuse panel.The fuse tap fit easily and I was able to tie the excess wire to a nearby harness. I liked that it came not only with 2 different size fuse taps, but also the required fuse! It was easy to remove the 7 amp fuse from my windshield washer fluid pump, plug it into the fuse tap beside the already installed 2 amp fuse, then plug the whole thing into the newly vacated space on my fuse box.I was worried that the straight connector on the USB end might interfere with my suction cup mount, but once it's set in the cameras plug it clears just fine. I love not seeing wires.

Super easy to do. The hardest part is finding which fuse to tap into. But so far this works very well and is super easy to install. I'll update my review in a few months to make sure it holds up but from what I can tell right now, it looks to be made well and I love that it has the plastic protective covering for the connections already there...just slip them down when you're done. The unit is small so it fit nice and snugly into my fuse box area. Im please, I'd buy this again. In fact, I probably am going to go ahead and wire up all my vehicles with the connector and just move the cams as needed.Look for my update in a few months.

I used this kit to wire a Viofo A119S v2 camera to my car. This kit includes a power supply and a couple of fuse taps.You'll want to make sure the fuse taps fit your car. Notably missing are Micro and Micro2 sizes, which are quite common. Other kits include these sizes, or you can buy the taps separately.The USB cable to the powered device is generously long; I had no problem routing it from behind my glove box (where my fuse panel is), around the A pillar, over the windshield, and behind my mirror. There was plenty of cable left. I don't think it's quite long enough to power a rear-facing camera on the back deck, but it's probably long enough for most applications on the windshield.The device is just a small box, about an inch square and around 2.5 inches long. There is no provided way to mount this box. You can zip-tie the cables (no zip ties are included in this kit) and hang the device somewhere, but you'll have to find a way to keep it from rattling or clicking while the car is in motion. There are no usable loops or screw tabs on the device, either. Double-tick tape or Velcro are the only other viable options for mounting.The device also has a beeper. It's quite annoying; it chirps when the device turns on and when it turns off. I have no clue what the purpose of the beeper is, and find it terribly annoying. I don't need a cacophony of chrips and tones greeting me when I turn my car on or shut it off. I see no way to disable the beeper, and the beeper isn't mentioend in the product manual.Once installed, it works great -- aside from that beeping.

The media could not be loaded. I’m no stranger to connecting a main power wire for dash cams and other auto accessories. This kit for a fellow DIY person will require some basic knowledge on electronics for safety in mind. I’m pretty confident and with years of experience, I had my power wire kit installed in about 15 minutes. I also was replacing another power wire of a different type of USB. This kit comes with a grounding wire connector already installed so right off the bat, that’s a good sign for 5 stars. Next, the kit includes different types of fuse adapters as shown in my pictures. I can probably use at least one of the unused adapters for a future project so that’s appreciated. Other kits I’ve used wasn’t as complete as this one. It will get the job done if the user doesn’t want an exposed wire around the dash. I like my wires tucked and neatly secured. With this kit, that is totally possible. Thank you for reading my review. Have a great day and stay healthy.

Inaccurate item description. Doesn't come with fuse taps as it says on the product page. I had to spend an extra $5 to buy what I needed which should have been included as written in the description:"The box contains all the components required to easily connect the power supply directly to a fuse box of any vehicle that uses either standard ATO/C fuses OR smaller ATM fuses.which covers most vehicles. It can be installed in less than a minute. Nearly less electrical expertise required.Simply remove a fuse from the fuse box, plug the required fuse "tap" cable supplied in the kit in to the vehicles fuse box and plug the displaced fuse in to the top of the fuse tap cable."