Pair (2 pack) Extreme Camber Caster Alignment Bushing Kit Front Caster/Camber Bushing Compatible with Ford Series Trucks F150 F250 F350 E150 4x4 & 2WD

I do not know why these are literally 1/4 the price of the Moog bushings, but the material is a bit soft. Otherwise I don't know how the Moogs could be any better. If you are an average hobbyist wrencher you can install these. As mentioned the material is a bit soft so do not try to beat them into the upper ball joint support or they will mushroom (ask how I know). In my case I needed to wedge the opening apart so they could be tapped in lightly. Same for making adjustments - I needed to wedge the opening apart to allow them to rotate freely enough to turn the inner and outer bushings with a pair of channellocks. It took me a few hours but I was able through trial and error to get these set up with max caster and also adjust the camber right where I wanted it. You will need to be patient and determined to get this done in your driveway and understand how to compensate Left and Right camber for the unlevelness of your driveway. After you are done setting camber/caster you'll also need to reset the toe. If you take it as a challenge you can accomplish this to improve your motorhome (or other Ford E350/450 application) handling. Or you could just install them at 0/0 and take them to a shop that knows how to adjust them. I had to call around but I did find one in my area that knew about them and knew how to adjust them - as a backup if I failed in my driveway attempt. The absolute worst part of dealing with these was trying to find the chart that shows the letter settings you need to use. Nothing comes with it and the chart on the Moog site is horrible and you cannot read it. I found one finally which I will attach here.

This bushing kit fixed my truck's issues. It is well made and an exact fit. I had to take off one star because you must study a fairly complex chart to set the caster and camber. It took several tries for me to remember left from right and get the right caster and camber. Making adjustments on the truck was tricky because of the height of the adjusters. I bought a slim adjustable wrench and got everything lined up.

Fixed my problem

Says it fits but it is about a 1/32" too large in diameter.

High quality and great price.