Led Strip Lights, 5V USB LED Lighting COB Short LED Strip Light White Flexible Not Dimmable led Light for Display Cabinet, Living Room,DIY Home COB Lighting Decor tv Lights (3.28FT 6500K)

These things are actually bright, and are a pleasing solid line of light, not the usual "dotted line" look you get with LED tape. They seem to stick well, although only time will tell. The only issue I had was the backing paper for the adhesive tears super-easily, so it took me forever to expose the adhesive.

This lights are amazing and very bright. You can cut them down to size and you can plug them into a USB plug. The adhesive is really good and you will enjoy the fact that you don't have to worry about them falling off.

Used them in a 3D print for a Lamp and the brightness amount was good for it, just a solid white color not yellow or anything like that.

works well, for shadow box project

This light strip works very well as a backround illuminator behind a large picture. We attached it to the frame pointing to the wall paired with a remote control plug. We had to use a USB extension cord to get power to it, something we knew beforehand. We like the illumination effect and will buy the strip again for other projects.

Plugged this into my Bambu Lab P1S. It’s a perfect power source. Plugging these into a usb into the wall isn’t why you want to do. These require barely any power.. so plugging them into a normal house outlet will make these not last long. They aren’t meant for that kind of power. Anyways the P1S has a usb port on the top inside towards the front of the printer. Take the top glass off, look inside towards the front and you’ll see it. I basically plugged the led light into that usb, wrapped up the cord and taped it next to the usb box. The led light gets routed on the small lip directly under that usb box on the printer. If the cord sticks out at all, the printer head will hit the cord and cause the tool head to fall off. The way you need to route the cord and and led is if you’re looking at the front of the printer, the cord should tuck in to the right of the box, led strip goes directly down and then directly to the left. Hope this helps any others with these printers.

Tape will NOT stick to plastic. Cleaned with alcohol like I normally would. Stick them on and they fall off after a few hours. I have had to glue these on. Light is good and bright, doesn’t seem cheap. Just the issues with the tape. Wish the usb leads were a little longer but they work.

Worked good but expect to use a real adhesive to attach them to whatever it needs attached toas the "3M' lable on the back covered some really weak not very tacky adhesive. It is bright enough for my needs and as I have a USB powered Hub right where I need the light it worked out well but the dimming is a little on the touchy side to get the exact level correct but it does remember the light level setting when turned off and back on. I like the cob style as it does not give a bunch of hot spots without a defuser and a defuser would be hard to use in the place where I attached mine. Gave 4 stars only due to the adheasive/

these are wonderfully bright, and the exact tone that we were looking for on our special project. we liked them so much, we bought several more.

The product heats up the USB plug-in so be cautious buying it