ANYCUBICHigh Clear 3D Printer Resin, Resist Yellowing and Highly Transparent, Tough and Resilient, Low Odor 3D Printing Resin, Widely Compatible for All LCD/DLP Resin 3D Printers (High Clear, 1kg)

Great resin, easy to print and strong prints with a high level of accuracy and detail. Fairly easy for beginners and requires little to no tuning on most standard cheaper LCD printers. Affordable and efficient. Shake well and ventilate your printing area always. I will keep this resin in my arsenal at all times.

Works great with my anycubic printer no changes in setup and no issues while printing

I am currently using the High Clear resin with the Photon Mono 5s printer. The High Clear resin requires higher exposure times than the other AnyCubic resins I've used, otherwise it will be prone to avoid adhesion problems, supports stretching and warping the model, etc. I didn't realize this at first and mistakenly thought "High Clear" was short for "High Speed Clear" since they are both on the same product page, and so I promptly dialed in the wrong settings on my very first print with it - oops! Lesson learned: pay attention to the details and don't make assumptions based on the name. Still, I kind of wish they'd called it "Super Clear" or better yet given it a separate product listing to avoid that potential confusion. Anyway, High Clear may print slowly, but I feel the end result is worth it and so far I love this resin. The model in the picture is cured but unvarnished and was printed using the default 0.05mm layer height. I have also used it more recently at 0.03mm layer height at roughly 80% of the recommended exposure for 0.05mm and the results are great. High Clear performs much better than the clear eco resin I used previously, both better at avoiding yellowing on post-cure and seems like it may be more resilient (I haven't done any formal drop tests or other serious stress tests; this is just based on how flexible thin parts remain). I have used the High Clear resin in a minimally ventillated room with a VOC meter and it does indeed seem low VOC during printing and also when having small amounts of liquid resin and just-removed models sitting exposed to the air. Once a model is washed with alcohol (but before the final post-cure), the drying/evaporation process does cause a small spike on my VOC meter - but even leaving a very wet model drying in open air for a while doesn't read as high for VOCs as if I use even a small quantity of rubber glue in the same room.

I've used this resin for years.Very good consistency in my prints and low quantity of failures (that course also be for other reasons beside the resin)The gray color is good for priming and painting.

Works well, looks great, low odor. Will buy again, and other colors.

I tried the high-speed resin but ended up with too many failed prints. I switched back to the standard resin, and now all of my models come out perfectly without any errors. The resin washes off easily, but it will turn your discarded IPA cloudy — it won’t clear up without filtration, so don’t even bother trying.One downside is that this resin can drip easily, making it a bit messy to handle. On my M7 Pro, the build platform doesn’t automatically raise after printing, so I have to manually lift it before removal. If I don’t, resin drips all over my desk because I can’t tilt the platform down to drain into the vat — but that’s an issue with the printer, not the resin itself.Overall, the resin is very reliable, and I continue to order it regularly.

Prints great! A little slow to print, but functionally, it's quite a strong viscosity. Easy to use. The bulk size is great.

High quality resin, been using this brand for years, never had a problem with my prints!